CORVETTE C4 AIR CLEANER

[zr-1.R1]

Good evening everyone, can you help me?
I have on my Z , AIR CLEANER damaged, near the steel band.
c4 standard pieces of them are compatible?
I put a picture

[Tony Davila]

Yes

[zr-1.R1]

ok, thank you.
when you pull the strap, there is a ring metal inside, not to do it crush?

[Tony Davila]

Originally Posted by zr-1.R1

ok, thank you.
when you pull the strap, there is a ring metal inside, not to do it crush?

Take a picture if you can, not really sure what you are talking about.

[zr-1.R1]

ok

[XfireZ51]

Originally Posted by zr-1.R1

ok

zr-1,

Se voi spiegare in Italiano podarsi capisco io.

[zr-1.R1]

ok perfect.

quando tiro la fascetta in metallo nell'accoppiamento tra i due pezzi , la parte interna si piega e si rompe .
di serie non è presente , un'anello di ferro per non farla schiacciare ?

[FU]

Originally Posted by zr-1.R1

ok perfect.

quando tiro la fascetta in metallo nell'accoppiamento tra i due pezzi , la parte interna si piega e si rompe .
di serie non è presente , un'anello di ferro per non farla schiacciare ?

English :

When I pull the metal strip in the coupling between the two pieces, the inside bends and breaks.
series is not present, a ring of iron to keep it from crushing?

[zr-1.R1]

when I pull the metal strip in the coupling between the two pieces, the inside bends and breaks.
series is not present, a ring of iron to keep it from crushing?

I wrote in Italian, at the request of xfirez51, I apologize to other members of the forum.
xfirez51 have Italian origins?

[FU]

Apology not needed at all. XfireZ51 (Dominic) and I are both of Itallian origin.