ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 04-28-2014   #1
USAZR1
 
USAZR1's Avatar
 
Join Date: Oct 2013
Location: Wichita Falls,Tx
Posts: 604
Default Tire Diameter vs Traction Control

After two months,our new 19" CCW wheels will be shipping out,today or tomorrow. I already have the rear tires,a pair of 335/30/19 Nitto NT-05's,but am trying to decide between their 275/35/19 and 285/30/19 for the fronts. If our 94 didn't have Traction Control,I would choose the wider and shorter 285's but those are approximately 1.25" shorter diameter than the rear 335's. My question is this: how much diameter difference can you get away with before running into problems with the TCS? I know I can just turn it off every time I drive the car but will it set codes by doing so?
There is only about 1/4" difference in height between the 275/35's and 335/35's so there wouldn't be a problem with that combo.
__________________
Clint & Sherry
1994 ZR-1 White/Red #152 (sold)
1991 ZR-1 Callaway Aerobody #1332 (sold)
1990 ZR-1 Red/Red #952 (sold)
2002 Z06 Torch Red/Mod Red widebody
USAZR1 is offline   Reply With Quote
Old 04-28-2014   #2
batchman
 
Join Date: Jun 2009
Location: I live at Devens, one run at a time
Posts: 455
Default Re: Tire Diameter vs Traction Control

I have no experience with C4 traction control but in the SN95 Mustang world (same era) the issue was if the rear tires were a lower profile - the TC would presume there was wheelspin going on. No problem if the front tires were the shorter ones.

For tire stagger I find workable balance with 315 front and 335 rear, although the real match for neutral handling is probably more like 305/335. I think with 275/335 you may find the way to "understeer city", particularly in trail braking.

HTH,
- Jeff
__________________
[I]91 ZR-1 #1840, autocrossing in SCCA BSP. FIC S/S's
DRM chip/Watson/Borla/lid/LW batt&headlights,
springs, shocks, pads & lines, quick rack & Turn One,
camber brace, 32/22mm sways, A/C halfway deleted
17x11 & 12 CCW's, 315 & 335 Hoosier A6s

[/I]
batchman is offline   Reply With Quote
Old 04-28-2014   #3
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
Default Re: Tire Diameter vs Traction Control

Quote:
Originally Posted by USAZR1 View Post
After two months,our new 19" CCW wheels will be shipping out,today or tomorrow. I already have the rear tires,a pair of 335/30/19 Nitto NT-05's,but am trying to decide between their 275/35/19 and 285/30/19 for the fronts. If our 94 didn't have Traction Control,I would choose the wider and shorter 285's but those are approximately 1.25" shorter diameter than the rear 335's. My question is this: how much diameter difference can you get away with before running into problems with the TCS? I know I can just turn it off every time I drive the car but will it set codes by doing so?
There is only about 1/4" difference in height between the 275/35's and 335/35's so there wouldn't be a problem with that combo.
Clint,

I don't think you should have an issue given that I am running staggered 18/19s on my ZR. Tires are 275/35/18 F/325/30/19s R. Haven't run into any problem w ASR or ABS on the 92. I know the rears are about an 1" taller than the stock tires because of the speedo error.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 04-28-2014   #4
USAZR1
 
USAZR1's Avatar
 
Join Date: Oct 2013
Location: Wichita Falls,Tx
Posts: 604
Default Re: Tire Diameter vs Traction Control

Quote:
Originally Posted by batchman View Post
For tire stagger I find workable balance with 315 front and 335 rear, although the real match for neutral handling is probably more like 305/335. I think with 275/335 you may find the way to "understeer city", particularly in trail braking.
HTH,
- Jeff
The next size up from a NT-05 275/35/19 (26.65") is a 305/35/19 (27.44") tall.
I really don't want a tire that tall on the front,Jeff.
__________________
Clint & Sherry
1994 ZR-1 White/Red #152 (sold)
1991 ZR-1 Callaway Aerobody #1332 (sold)
1990 ZR-1 Red/Red #952 (sold)
2002 Z06 Torch Red/Mod Red widebody
USAZR1 is offline   Reply With Quote
Old 04-28-2014   #5
USAZR1
 
USAZR1's Avatar
 
Join Date: Oct 2013
Location: Wichita Falls,Tx
Posts: 604
Default Re: Tire Diameter vs Traction Control

Quote:
Originally Posted by XfireZ51 View Post
Clint,
I don't think you should have an issue given that I am running staggered 18/19s on my ZR. Tires are 275/35/18 F/325/30/19s R. Haven't run into any problem w ASR or ABS on the 92. I know the rears are about an 1" taller than the stock tires because of the speedo error.
Dom,I forgot to even mention the ABS and possible problems. On my former Callaway,I installed Michelin PS 285/35/18's (26.5") and 345/35/18's (27.7").
Even though it didn't have Traction Control,that diameter difference would set off the ABS light after a mile or two,every time I drove the car.
__________________
Clint & Sherry
1994 ZR-1 White/Red #152 (sold)
1991 ZR-1 Callaway Aerobody #1332 (sold)
1990 ZR-1 Red/Red #952 (sold)
2002 Z06 Torch Red/Mod Red widebody
USAZR1 is offline   Reply With Quote
Old 04-28-2014   #6
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
Default Re: Tire Diameter vs Traction Control

Clint,

No issues here.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:12 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020