01-04-2014 | #1 |
Join Date: Jul 2005
Location: Las Vegas, Nevada
Posts: 777
|
Vac pump behind glove box
What is the vac pump behind glove box? Looked in the FSM but didn't see anything. I imagine it has to do with the HVAC doors, but not sure.
With the key on, mine will come on for a few seconds then go off then come on again. Keeps repeating. Vac leak somewhere? Thanks
__________________
JB 1990 #148 Red/Saddle Haibeck AYBKG5 Chip/RC Engineering/Flowmasters/K&N/Samco/Fuzzy Dice :cheers: |
01-04-2014 | #2 |
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
Re: Vac pump behind glove box
Pretty sure that the pump you're hearing is the pump under the right headlight.
Depending on the cycling frequency, you probably do have a vacuum leak somewhere in the secondarys' vacuum system.
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] |
01-04-2014 | #3 |
Join Date: Jul 2005
Location: Las Vegas, Nevada
Posts: 777
|
Re: Vac pump behind glove box
No, it's not the secondary pump behind the headlight, it is definitly behind the firewall behind the glove box. I remember reading about it before, but I can't remember what it was for.
__________________
JB 1990 #148 Red/Saddle Haibeck AYBKG5 Chip/RC Engineering/Flowmasters/K&N/Samco/Fuzzy Dice :cheers: |
01-06-2014 | #4 |
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
|
Re: Vac pump behind glove box
Well????......what is it
Are you or anyone checking out the Consumer Technology Trade Show in Las Vegas Jan 7-10, 2014? Consumer Technology Trade Show
__________________
Left Clickable links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 01-06-2014 at 11:15 AM. |
01-06-2014 | #5 |
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
Re: Vac pump behind glove box
Maybe you're referring to the HVAC vac-to-temp door CONNECTOR?
This is for '90...
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] |
01-06-2014 | #6 |
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
|
Re: Vac pump behind glove box
That is some good stuff there Schrade. Thanks for
Photos |
01-06-2014 | #7 |
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
Re: Vac pump behind glove box
Sure thing!
JB has my curiousity tweaked here now (always is tho'). What's he referring to??? ed.: You got any snappics posted up, of that gizmo there Cliff? It whupped me on vac diagnostics. Where is Encyclopedia Dynomatica
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] Last edited by Schrade; 01-06-2014 at 01:06 PM. |
01-06-2014 | #8 | |
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
|
Re: Vac pump behind glove box
Quote:
I always was curious where that HVAC vacuum line connected to the passenger side Plenum went in addition to cruise control I keep thinking I have to get me one of those manuals but then you take photos of everything I ever need
__________________
Left Clickable links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 01-06-2014 at 01:48 PM. |
|
01-06-2014 | #9 | |
Join Date: Jul 2005
Location: Las Vegas, Nevada
Posts: 777
|
Re: Vac pump behind glove box
Quote:
I just turned the key on and the secondary vac pump ran a couple seconds as usual and this HVAC pump ran maybe 30 seconds to a minute longer and went off. I listend for a couple more minutes and nothing, so I don't think I have a problem. Thanks much for the reply!! This is what this forum is all about! Great to know someone will have the answer!! John
__________________
JB 1990 #148 Red/Saddle Haibeck AYBKG5 Chip/RC Engineering/Flowmasters/K&N/Samco/Fuzzy Dice :cheers: |
|
01-06-2014 | #10 | |
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
Re: Vac pump behind glove box
Quote:
I think if there's something running in there Mr B., then something might be wrong. I don't think it's a pump of any sort, is it? Anybody? With some hesitation problem here of my own, and a rare blinking light on the A/C control (only happened twice @ re-assembly, and hasn't happened again), AND I wasn't able to confirm vacuum integrity in the HVAC vac supply line, I'm wanting to know a little more here too. I did the diagnostic button-pushing in the A/C control head, and got no codes. But the light didn't blink for no reason. Try yours, and see what you get.
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] |
|
Thread Tools | |
Display Modes | |
|
|