ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings
Reload this Page Shock rebuild questions
Register FAQ Calendar Search Today's Posts Mark Forums Read

Reply
Page 1 of 2 1 2
 
Thread Tools Display Modes
Old 12-27-2013   #1
pantera1683
 
Join Date: Mar 2010
Location: Fort Worth, TX
Posts: 396
Default Shock rebuild questions
I have some extra shocks (front and rear) I want to have rebuilt and revalved. Is it possible to powdercoat them before I send them to Bilstein and where can I get new rubber or poly bushings for them?
pantera1683 is offline   Reply With Quote
Old 12-27-2013   #2
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Shock rebuild questions
Quote:
Originally Posted by pantera1683 View Post
I have some extra shocks (front and rear) I want to have rebuilt and revalved. Is it possible to powdercoat them before I send them to Bilstein and where can I get new rubber or poly bushings for them?
Sure but what if the shocks you send to them are not in a rebuildable by Bilstein condition? I think that is unlikely but it's a possibility. Also during tear down its possible the coating also could become damaged during the process. Just some thoughts

DRM used to carry the bushings if not I'm sure Bilstein does. GC
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 12-27-2013   #3
pantera1683
 
Join Date: Mar 2010
Location: Fort Worth, TX
Posts: 396
Default Re: Shock rebuild questions
Quote:
Originally Posted by GOLDCYLON View Post
Also during tear down its possible the coating also could become damaged during the process. GC
I thought about that too, but Bilstein doesn't paint them, they just apply new stickers-looks pretty silly on old dirty shocks.
pantera1683 is offline   Reply With Quote
Old 12-27-2013   #4
Jagdpanzer
 
Jagdpanzer's Avatar
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
Default Re: Shock rebuild questions
Something to think about. During the powder coat process the shocks will see 400 degrees F in the oven to cure the resin. To be safe I would fully disassemble first.
__________________
Phil Wasinger
1994 Torch Red ZR-1
WAZOO Member
George Braml Intake
Jagdpanzer is offline   Reply With Quote
Old 12-27-2013   #5
pantera1683
 
Join Date: Mar 2010
Location: Fort Worth, TX
Posts: 396
Default Re: Shock rebuild questions
Quote:
Originally Posted by Jagdpanzer View Post
Something to think about. During the powder coat process the shocks will see 400 degrees F in the oven to cure the resin. To be safe I would fully disassemble first.
Wow, in that case maybe painting would be better!
pantera1683 is offline   Reply With Quote
Old 12-27-2013   #6
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Shock rebuild questions
Quote:
Originally Posted by pantera1683 View Post
I thought about that too, but Bilstein doesn't paint them, they just apply new stickers-looks pretty silly on old dirty shocks.
I agree and your not saving that much on the rebuild. I only like the rebuild idea if your going with a moracca or senza valving to help in auto crossing.
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 12-27-2013   #7
pantera1683
 
Join Date: Mar 2010
Location: Fort Worth, TX
Posts: 396
Default Re: Shock rebuild questions
Quote:
Originally Posted by GOLDCYLON View Post
I agree and your not saving that much on the rebuild. I only like the rebuild idea if your going with a moracca or senza valving to help in auto crossing.
Is the Moracca valving only good for autocrossing? I want a stiffer valving to go with my coilovers.
pantera1683 is offline   Reply With Quote
Old 12-27-2013   #8
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Shock rebuild questions
Quote:
Originally Posted by pantera1683 View Post
Is the Moracca valving only good for autocrossing? I want a stiffer valving to go with my coilovers.
Yes it is
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 12-28-2013   #9
Coupe89
 
Join Date: Aug 2009
Location: Livermore, Ca
Posts: 204
Default Re: Shock rebuild questions
Quote:
Originally Posted by pantera1683 View Post
Is the Moracca valving only good for autocrossing? I want a stiffer valving to go with my coilovers.
Yep very stiff... haven't tried performance yet...
__________________
1990 ZR-1 #642
Coupe89 is offline   Reply With Quote
Old 12-28-2013   #10
Kevin
 
Kevin's Avatar
 
Join Date: Jun 2005
Location: pittsburgh
Posts: 4,632
Default Re: Shock rebuild questions


__________________
It's not the car, it's the people - Doug Johnson
90 r/r "KEYS ON" nick named "T.L.B"
Kevin is offline   Reply With Quote
Reply
Page 1 of 2 1 2

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 12:48 PM.

Contact Us - ZR-1 Net Registry - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020