Starter Rebuild Part #s - ZR-1 Net Registry Forums

92whiteZ · 12-22-2013

Hello all,

I know the rebuilding of the starter has been covered but in my searches I couldn't find the exact part numbers for the Denso rebuild kit. The links in the posts are no longer valid.

What rebuild kit should I be looking for?

thx

92whiteZ · 12-22-2013

beyond the brushes/plunger should I be replacing anything else?

thx

Bearly Flying · 12-22-2013

Check with a Chrysler Dealer for parts, They use the same Nippon Denso starter in Dodge Trucks.

It was the contacts in my starter that were badly arced, the plunger cleaned up with some emery cloth. Contacts cost me $3.00, they are slightly larger on the contact face than the originals. Good Luck.

WVZR-1 · 12-23-2013

With the use of the 'Denso in so many applications I'd suggest a visit to a local rebuilder for just a parts buy. If you're unfamiliar with the repair maybe consider having the local shop do the "refresh" for you. I can think of NO reason that a person should need to consider the Internet purchase of the "packages". The local shop should do you well and be inexpensive also. The required parts will be "on the shelf" I'd think for sure.

92whiteZ · 12-23-2013

thx gentlemen. thankfully this is a spare starter. wanted to try my hand at rebuilding one.

Bearly - what year/model Dodge trucks?

thx

Bearly Flying · 12-23-2013

Don't know for sure, I just took my old contacts down with me, and the Parts guy found a set that would work. They are slightly larger than the originals, more contact face, but fit in the housing with no interferences.

Should be relatively recent model years, I would think. He had them on the shelf...

WVZR-1 · 12-23-2013

I believe as long as you're doing it you might as well do the plunger also. The 'Denso starter is a 128000-8281 I believe and an OE original GM # would have been a 1998585. It's a 1.4 KW series with CW rotation but I doubt that's of an concern. I really believe a visit to a local shop with the 'Denso number or the OE GM # might end up with the correct plunger and contacts. The shop would recommend I'm sure the heavier contact and there are plunger differences.

Nearly every import uses the 'Denso - parts are every where!

12-22-2013	#1
92whiteZ Join Date: Sep 2013 Location: Los Angeles, CA Posts: 122	Starter Rebuild Part #s Hello all, I know the rebuilding of the starter has been covered but in my searches I couldn't find the exact part numbers for the Denso rebuild kit. The links in the posts are no longer valid. What rebuild kit should I be looking for? thx

12-22-2013	#2
92whiteZ Join Date: Sep 2013 Location: Los Angeles, CA Posts: 122	Re: Starter Rebuild Part #s beyond the brushes/plunger should I be replacing anything else? thx

12-22-2013	#3
Bearly Flying Join Date: Dec 2012 Location: Ponoka, Alberta, Canada Posts: 158	Re: Starter Rebuild Part #s Check with a Chrysler Dealer for parts, They use the same Nippon Denso starter in Dodge Trucks. It was the contacts in my starter that were badly arced, the plunger cleaned up with some emery cloth. Contacts cost me $3.00, they are slightly larger on the contact face than the originals. Good Luck. __________________ 91 ZR-1 Arctic White/Gray 01 C-5 Magnetic Red/Black 85 FJ 1100 (Big Bore kit, Hooligan Bike) 05 FJR 1300 Yamaha (Long Distance, Sport Touring) And a whole whack of RC Planes

12-23-2013	#4
WVZR-1 Join Date: Oct 2004 Posts: 1,890	Re: Starter Rebuild Part #s With the use of the 'Denso in so many applications I'd suggest a visit to a local rebuilder for just a parts buy. If you're unfamiliar with the repair maybe consider having the local shop do the "refresh" for you. I can think of NO reason that a person should need to consider the Internet purchase of the "packages". The local shop should do you well and be inexpensive also. The required parts will be "on the shelf" I'd think for sure.

12-23-2013	#5
92whiteZ Join Date: Sep 2013 Location: Los Angeles, CA Posts: 122	Re: Starter Rebuild Part #s thx gentlemen. thankfully this is a spare starter. wanted to try my hand at rebuilding one. Bearly - what year/model Dodge trucks? thx

12-23-2013	#6
Bearly Flying Join Date: Dec 2012 Location: Ponoka, Alberta, Canada Posts: 158	Re: Starter Rebuild Part #s Don't know for sure, I just took my old contacts down with me, and the Parts guy found a set that would work. They are slightly larger than the originals, more contact face, but fit in the housing with no interferences. Should be relatively recent model years, I would think. He had them on the shelf... __________________ 91 ZR-1 Arctic White/Gray 01 C-5 Magnetic Red/Black 85 FJ 1100 (Big Bore kit, Hooligan Bike) 05 FJR 1300 Yamaha (Long Distance, Sport Touring) And a whole whack of RC Planes

12-23-2013	#7
WVZR-1 Join Date: Oct 2004 Posts: 1,890	Re: Starter Rebuild Part #s I believe as long as you're doing it you might as well do the plunger also. The 'Denso starter is a 128000-8281 I believe and an OE original GM # would have been a 1998585. It's a 1.4 KW series with CW rotation but I doubt that's of an concern. I really believe a visit to a local shop with the 'Denso number or the OE GM # might end up with the correct plunger and contacts. The shop would recommend I'm sure the heavier contact and there are plunger differences. Nearly every import uses the 'Denso - parts are every where!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode