What size allen wrench for the diff drain plug?

[Z06scentair]

I searched and didn't find what size allen wrench to remove the fill plug on the differential?

Any help.

[92whiteZ]

I believe its a 10 mm

[Z06scentair]

Originally Posted by 92whiteZ

I believe its a 10 mm

10mm seems to small from looking at it.....headed to harbor freight in the morning. I will buy a big set and hopefully hit the jackpot.

Thanks for the chime in!

[We Gone]

Is it 10 mm 3/8"

[Dynomite]

Originally Posted by We Gone

Is it 10 mm or 3/8"

3/8" which is 9.525 mm for Differential Fill Plug.

See Item 5 for the addition of the Differential Drain Plug LT5/ZR-1 Fluids

[We Gone]

Originally Posted by Dynomite

3/8" which is 9.5 mm

See Item 5 for the addition of the Differential Drain Plug LT5/ZR-1 Fluids

I was waiting for you to post up the correct answer

[Z06scentair]

Thanks guys headed to the harbor freight toy store!

[Dynomite]

Originally Posted by Z06scentair

Thanks guys headed to the harbor freight toy store!

When you are at Harbor Freight....get one of these

Hydraulic Aluminum Floor Jack (3 ton)
a. Pittsburgh Racing
b. Very low initial height and weighs 55 lbs.
c. High lift rate.
d. Minimum Saddle Height 3-3/4 inch.
e. Maximum Saddle Height 19-1/4 inch.

3 ton Pittsburgh Racing Aluminum Floor Jack
ZR-1 and LT5 Tools



Some More Stuff you can get at Harbor Freight

Lifting The LT5
Lifting and Towing the ZR-1

[Z06scentair]

Originally Posted by Dynomite

When you are at Harbor Freight....get one of these

Hydraulic Aluminum Floor Jack (3 ton)
a. Pittsburgh Racing
b. Very low initial height and weighs 55 lbs.
c. High lift rate.
d. Minimum Saddle Height 3-3/4 inch.
e. Maximum Saddle Height 19-1/4 inch.

3 ton Pittsburgh Racing Aluminum Floor Jack
ZR-1 and LT5 Tools



Some More Stuff you can get at Harbor Freight

Lifting The LT5
Lifting and Towing the ZR-1

Luckily I have a couple of lifts so no need for a jack.....got a set of allen wrenches yesterday at the china freight store. I may try and tackle it today!

Thanks to all!

[Racinfan83]

Originally Posted by Dynomite

When you are at Harbor Freight....get one of these

Hydraulic Aluminum Floor Jack (3 ton)
a. Pittsburgh Racing
b. Very low initial height and weighs 55 lbs.
c. High lift rate.
d. Minimum Saddle Height 3-3/4 inch.
e. Maximum Saddle Height 19-1/4 inch.

3 ton Pittsburgh Racing Aluminum Floor Jack
ZR-1 and LT5 Tools



Some More Stuff you can get at Harbor Freight

Lifting The LT5
Lifting and Towing the ZR-1

I got one of the next model down from that last week for like $69... Whole lot easier to use then my heavy 3 ton steel floor jack...