|
01-31-2013
|
#11 | |
 Join Date: May 2011
Location: Sydney, Australia
Posts: 2,479
|
Re: helmets?
Quote:
• Helmet required (D.O.T. or Snell rated) ten years or newer. • Full covered shoe wear required. • No shorts, no sandals permitted. All vehicles must have tech inspection form completed, prior to entering Tech lane. • All vehicles must go through tech inspection. • Convertibles must have factory rollover protection. Please contact us if you are unsure if your car has this option. • Only convertibles with a cage & 5 point safety harness will be allowed to run top down if participant chooses. • Alternative fuels to gasoline and diesel must be reported to our crew, for submission to rescue personnel. Example: Methanol, Alcohol, Nitrous, etc. • Your vehicle assigned number must be visible at right upper corner of your windshield and right rear corner
__________________
Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car |
|
|
|
|
01-31-2013
|
#12 |
 
Join Date: Jan 2010
Location: Mystic CT
Posts: 2,635
|
Re: helmets?
March Hot Rod magazine has an article
on Snell SA2010 certified helmets. There's 6 listed all less than $400. Least $ is by G-Force @ $199 |
|
|
|
|
02-01-2013
|
#13 |
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: helmets?
Picked up a HJC, Snell 2010 rated for $138 yesterday. Now to ge some tires and open my TB. This is exciting!
P.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry Last edited by Paul Workman; 02-01-2013 at 11:49 AM. |
|
|
|
|
02-01-2013
|
#14 |
|
Join Date: May 2011
Location: Sydney, Australia
Posts: 2,479
|
Re: helmets?
Well do tell where you get the helmet.
__________________
Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car |
|
|
|
|
02-01-2013
|
#15 |
Join Date: Apr 2006
Location: Ideho
Posts: 2,653
|
Re: helmets?
Summit will beat anybodies price by a buck.
__________________
[I][FONT=Comic Sans MS]John Boyd[/FONT][/I] [I][FONT=Comic Sans MS][SIZE=1]Ideho[/SIZE][/FONT][/I] [FONT=Comic Sans MS][SIZE=1][I]2015 ZL1 [/I][I]Camaro #1121 BLACK/BLACK 6 SPD (540 RWHP)[/I][/SIZE][/FONT] [I][FONT=Comic Sans MS][SIZE=1]1991 ZR-1 #458 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK 72[/COLOR]k miles ([B][COLOR=red]SOLD[/COLOR][/B]) 1991 ZR-1 #473 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK [/COLOR]37k miles ([B][COLOR=red]SOLD[/COLOR][/B])[/SIZE][/FONT][/I] |
|
|
|
|
02-01-2013
|
#16 |
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,452
|
Re: helmets?
Its all about fitment, rating & safety, not $, Its your head/safety
Rules for this seem relaxed, check those tires for dates, cracks, pressure, no blowouts please at 150 aprox |
|
|
|
|
02-01-2013
|
#17 |
|
Join Date: Jun 2009
Location: I live at Devens, one run at a time
Posts: 455
|
Re: helmets?
True dat.
Also highly recommend tight hubs. While free play up to .005" is ok per FSM at 150mph when you need brakes you do not want runout from hub vibe. As I seem to have become highly experienced in hub life cycles I did once find a bumpy brake zone plus a tired hub allowed a caliper to hop the pin and become intimate with the inside of the wheel. Good news was this happened at 35mph. Cheers, - Jeff
__________________
[I]91 ZR-1 #1840, autocrossing in SCCA BSP. FIC S/S's DRM chip/Watson/Borla/lid/LW batt&headlights, springs, shocks, pads & lines, quick rack & Turn One, camber brace, 32/22mm sways, A/C halfway deleted 17x11 & 12 CCW's, 315 & 335 Hoosier A6s [/I] |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
