10-16-2012 | #1 |
Join Date: Aug 2012
Location: Louisiana
Posts: 74
|
Amp / Voltage draw issue.
I have a problem and I wanted to just throw this out there before I break my multi-meter out and start poking around on the car. I have something, somewhere sucking the life out of my battery over the course of a week. I thought maybe I had a bad battery, took it to Autozone today and they tested it and said all's well. So are there any "usual suspects" as far as these cars go with this issue? I know my dome lights, under-hood lights, courtesey lights, and glove box lights are in working order. The radio is stock, but there is an aftermarket amplifer wired in to replace the bose speakers, but the power light on it is off when the car is. Maybe a stuck relay or something?? Where to start? What to do? My little 1.5 amp battery charger stays on it in the meantime.
__________________
[SIGPIC][/SIGPIC] 1991 ZR1 #144 421 rwhp 392 rwt 2012 Toyota Tundra Crewmax 4x4 5.7 liter 1967 Ford Mustang resto-mod coupe 289 (Sold) |
10-16-2012 | #2 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,178
|
Re: Amp / Voltage draw issue.
my best suggestion is to connect the multi-meter and pull one fuse at time and watch the current level..
but before that.. what was the last thing done to the car prior to this occurring?
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
10-16-2012 | #3 |
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,151
|
Re: Amp / Voltage draw issue.
Check the map lights in the visor as well. Is this a combo top and side post battery you have? G C
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
10-16-2012 | #4 |
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,727
|
Re: Amp / Voltage draw issue.
Check and make sure door switch for courtesy light is working - shutting off after 15-20 seconds. These switches has been known to go bad.
|
10-16-2012 | #5 |
Join Date: Aug 2012
Location: Louisiana
Posts: 74
|
Re: Amp / Voltage draw issue.
Its been like this since i got the car...it sits for longer than a week and it needs a charge. I have had the car for about 6 weeks. It is a side post battery and the lights do turn off. The visor lights are off as well.
__________________
[SIGPIC][/SIGPIC] 1991 ZR1 #144 421 rwhp 392 rwt 2012 Toyota Tundra Crewmax 4x4 5.7 liter 1967 Ford Mustang resto-mod coupe 289 (Sold) |
10-16-2012 | #6 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,178
|
Re: Amp / Voltage draw issue.
Next I would suggest disconnecting the Stereo aftermarket amp and see if that fixes it..
Is there an aftermarket keyless entry or alarm on it?
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
10-16-2012 | #7 | |
Join Date: Jan 2012
Location: Wisconsin
Posts: 886
|
Re: Amp / Voltage draw issue.
Quote:
On my Z, the PO put in an aftermarket alarm system. What a PITA. It will suck the battery down after a week. It's on my list of things to pull out this winter. |
|
10-16-2012 | #8 |
Join Date: Oct 2004
Posts: 1,889
|
Re: Amp / Voltage draw issue.
I agree with -=Jeff=- but first establish what the simple parasitic draw actually is. Do you have a DVM? Set your DVM to either 10A or 20A and with the DVM connected between the negative terminal of the battery and the negative cable see what it actually is. Make sure the car has "gone to sleep" - "key off" or in your pocket. If you've got something very low maybe 30 milliamps or less it says maybe you don't. An early 90's car you might expect maybe as little as 20 milliamps or so to be the norm. Never checked mine.
If you've got something larger than that could be as high as 2 - 3 Amp or so you then start to pull fuses one at a time and monitor the drop. When you pull one that dramatically lowers the draw to an expected value then you search that circuit. I was always told to pull lower amp fuses first (don't know why) and do larger value and breakers last. I was also told to do this first but don't remember ever doing it. Remove both battery cables and check Ohms across the battery cable ends. Something very low hints major shorts. I don't recall how easy the red wire is to get to on the alternator but a bad diode will take a battery down pretty quick. You could remove it to check also. It's much easier for me to walk to the car and do it than it is to try and explain it but I just wouldn't start tearing into things. I'd measure the drain before I even worried about the amp. I might make the amp first after the check though. Last edited by WVZR-1; 10-16-2012 at 10:55 PM. |
10-16-2012 | #9 |
Join Date: Aug 2012
Location: Louisiana
Posts: 74
|
Re: Amp / Voltage draw issue.
I plan on measuring and testing...looks like i have something to do this weekend...
__________________
[SIGPIC][/SIGPIC] 1991 ZR1 #144 421 rwhp 392 rwt 2012 Toyota Tundra Crewmax 4x4 5.7 liter 1967 Ford Mustang resto-mod coupe 289 (Sold) |
10-16-2012 | #10 |
Join Date: Oct 2004
Posts: 1,889
|
Re: Amp / Voltage draw issue.
I'd maybe ask someone with a '91MY to check theirs for a good reference for the basic test. That might give you a "target"! If you go to a FSM it will ask you to add circuits to arrive at a value. A known good starting point might be my best thought of the day!
|
Thread Tools | |
Display Modes | |
|
|