33 Spline

[ALZR1]

Originally Posted by Jagdpanzer

Al,
Excellent design and supurb machine work.
I'm sure these will be the last set of spindles you will be installing.
Which company supplied these?
They do not look like the larger spindles some have got in the past from Summers Brothers out in California.
Base on this setup what component in the drivetrain do you now consider to be your weakest link?

I've never seen summers Bros. Axles or how big of an axle they have.
Someone has made A reproduction of the stock axle from summer Bros. 27 spline out of A billet 4340,but these broke just the same.

AL.

[Paul in VA]

Hi Al: Did you make these?

[GOLDCYLON]

Originally Posted by ALZR1

These axles are pure racing products.
This is an upgrade for anybody that breaks axles.They are beefier the stock axles below the splines at the shoulder measures 1.235".The new axles at the shoulder measure 1.450",and Remember these axles are made out of A much better material.

AL.

Awesome AL ok that makes sense. What a lot of folks do is spend a lot of time and money wise for more horsepower. Its nice to see the transfer links beefed up to take the raw power. Great job.

[Jagdpanzer]

Originally Posted by ALZR1

I've never seen summers Bros. Axles or how big of an axle they have.
AL.

Al,
Here is a photo of the Summers Bros 31 spline spindles.
Not nearly as pretty as yours.




And here are pair of 27 spline billet spindles I picked up a while back.

[ALZR1]

Originally Posted by Paul in VA

Hi Al: Did you make these?

I had A company make them for me and I supplied the bearings.

AL.

[Pete]

Phil,what hub/bearing you use with the 31 spline axles.

Pete

[Jagdpanzer]

Al,
After looking more closely at your bearing hubs appears the bolt pattern was re-drilled. Are these hubs from a different car model modified to work on a C4 suspension with your new 33 spline spindles?
Come on Al out with it, inquiring minds want to know

[ALZR1]

Originally Posted by Jagdpanzer

Al,
After looking more closely at your bearing hubs appears the bolt pattern was re-drilled. Are these hubs from a different car model modified to work on a C4 suspension with your new 31 spline spindles?
Come on Al out with it, inquiring minds want to know

33 splines not 31.

AL.

[Jagdpanzer]

Originally Posted by Pete

Phil,what hub/bearing you use with the 31 spline axles.

Pete

Summers Bros bore out the stock bearing hubs and re broach them for 31 spines. If you go with their setup be sure you have them do up an extra bearing hub otherwise it will be a while getting a spare if you should need one later on.

[Jagdpanzer]

Originally Posted by ALZR1

33 splines not 31.

AL.

Al,
Sorry, I corrected the post.