ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 07-18-2012   #11
LGAFF
 
LGAFF's Avatar
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
Default Re: 90 clutch master to slave hydraulic line available?

I did the upgrade
__________________
LGAFF
90 #966-150K miles-sold
92 #234-sold
1987 Callaway TT #17
1991 ZR-1 #1359
LGAFF is offline   Reply With Quote
Old 07-18-2012   #12
ghlkal
 
ghlkal's Avatar
 
Join Date: Jan 2012
Location: Wisconsin
Posts: 887
Default Re: 90 clutch master to slave hydraulic line available?

OK, it's the slave that's bad ...

As soon as I loosened the bolt and nut holding the slave into the housing, some fluid dripped out. (I assumed incorrectly that since there's no gasket there, I would see fluid if the slave was leaking inside the housing.)



Something doesn't look right here ...



My plan is to order a 1990 cylinder from Jim at Power Torque systems as my line looks better than I thought.

My line has some kind of external black coating on it until about 2" before the fitting on the slave. I don't know what this is, but I think it's all OK.

The master has been replaced in the past (it has the 3/8" flange characteristic of the aftermarket master cylinders).
ghlkal is offline   Reply With Quote
Old 07-18-2012   #13
scottfab
 
scottfab's Avatar
 
Join Date: Jan 2009
Location: Portland Oregon metro area (Washington side)
Posts: 3,207
Default Re: 90 clutch master to slave hydraulic line available?

[QUOTE=ghlkal;145697]OK, it's the slave that's bad ...

As soon as I loosened the bolt and nut holding the slave into the housing, some fluid dripped out. (I assumed incorrectly that since there's no gasket there, I would see fluid if the slave was leaking inside the housing.)
[QUOTE]

Exact same way mine failed. There have been write-up concerning the geometry of the shaft being off.
__________________
Scott


Vett owner since 1979._It's about the car and the people
scottfab is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:39 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020