|
10-09-2011
|
#1 |
 Join Date: Jul 2005
Location: Lees Summit, MO
Posts: 102
|
Battery cable question
The threads on the threaded bolt on my negative battery cable appear to have worn down to the point that the cable cannot be held tight against the battery. Is it possible to replace the bolt or will I need to replace the entire negative battery cable? Any thoughts are appreciated.
|
|
|
|
10-09-2011
|
#2 |
|
Join Date: Sep 2010
Location: Panama City Beach
Posts: 26
|
Re: Battery cable question
You can buy replacement bolts at the auto parts store. I just replaced both of mine the other day.
__________________
________ 90 white/grey #2011 |
|
|
|
|
10-09-2011
|
#3 |
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,713
|
Re: Battery cable question
It can be a little annoying to get the bolt out of the plastic (actually, it's more annoying getting the new one tucked into the plastic), but they are replaceable. If you can't find one at an auto parts store, any GM dealer should have them for a reasonable price.
__________________
Bob Saveland Former owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img] |
|
|
|
|
10-09-2011
|
#4 | |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Battery cable question
Quote:
Concur grand total $1.99 real easy to do
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
10-09-2011
|
#5 |
|
Join Date: Jul 2005
Location: Lees Summit, MO
Posts: 102
|
Re: Battery cable question
Thanks to all who replied. I was hoping that there was an easy solution.
|
|
|
|
|
10-10-2011
|
#6 |
|
Join Date: Jul 2011
Location: Homestead, Fl
Posts: 248
|
Re: Battery cable question
I havent looked at mine specifically but usually, i just put a little oil or wd40 on them and they pop out and back in much more easily..if you don't, they can fight ya.
__________________
Sam 1991 ZR-1 :salute: |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
