Thanks Jerry's gaskets - ZR-1 Net Registry Forums

Y-me · 08-06-2011

After dropping an injector clip down a primary port and then getting my magnet on a string stuck to the valve and breaking the string, I had to remove the intake manifold/injector housing to get the stuff out. I could not find the gaskets anywhere, even fairfax auto had a listing for ZR1 J code gaskets but the pic was obviously L98. Went to the local dealer, Kid had no clue, I told him it was a ZR1 he was like, thats just a suspension package right? *slap* I told him all about it after he could not find the stuff listed (computer kept showing us L98's) he asked "are you sure it's the original motor?'" sigh.

Anyways Ordered them from Jerry's they got here in 3 days and now the car is back together and I can once again pull it on the street and bring My LT1 car back in her cozy garage 'Don't shoot!' in time for our trip to key west so it won't sit outside.

Daniel_Mc · 08-07-2011

Jerry's the man!

Bill · 08-07-2011

Jerry comes through again!
Thanks Jerry

secondchance · 08-07-2011

Thanks to Jerry too for exhaust gaskets and dip tube seal.

A26B · 08-09-2011

I appreciate y'all (my best Okie typing interpretation).

Blue Flame Restorations · 08-09-2011

Hi Jerry. I really hope you realize just how much you're appreciated. The help you gave me on the 88 was amazing.

Brett

GOLDCYLON · 08-09-2011

Jerry thanks for what you do. GC

ZR1Vette · 08-09-2011

Another

for Jerry... saved me delaying an oil change this week and he does not even know it. Several years ago when I was changing out all fluids/injectors/ whatever & etc on my ZR-1 I got my gaskets et al from Jerry...he said I need to replace the oil drain plug O ring/gasket and he sent me two...just for the next time I need and did not even charge me for the second one. That second one is the one I used this week

ittlfly · 08-09-2011

Quote:

Originally Posted by GOLDCYLON

Jerry thanks for what you do. GC

Just another hats off to Jerry. It's great to have him around.

08-06-2011	#1
Y-me Join Date: Jul 2011 Location: Ft Myers Fl Posts: 224	Thanks Jerry's gaskets After dropping an injector clip down a primary port and then getting my magnet on a string stuck to the valve and breaking the string, I had to remove the intake manifold/injector housing to get the stuff out. I could not find the gaskets anywhere, even fairfax auto had a listing for ZR1 J code gaskets but the pic was obviously L98. Went to the local dealer, Kid had no clue, I told him it was a ZR1 he was like, thats just a suspension package right? slap I told him all about it after he could not find the stuff listed (computer kept showing us L98's) he asked "are you sure it's the original motor?'" sigh. Anyways Ordered them from Jerry's they got here in 3 days and now the car is back together and I can once again pull it on the street and bring My LT1 car back in her cozy garage 'Don't shoot!' in time for our trip to key west so it won't sit outside.

08-07-2011	#2
Daniel_Mc Join Date: Jan 2007 Location: Pineville, LA Posts: 586	Re: Thanks Jerry's gaskets Jerry's the man!

08-07-2011	#3
Bill Join Date: Mar 2004 Location: Sacramento, CA. Posts: 141	Re: Thanks Jerry's gaskets Jerry comes through again! Thanks Jerry __________________ [img]http://home.comcast.net/%7Ebsoomann/srsig.jpg[/img]

08-07-2011	#4
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,723	Re: Thanks Jerry's gaskets Thanks to Jerry too for exhaust gaskets and dip tube seal.

08-09-2011	#5
A26B Join Date: Dec 2003 Location: Arcadia,OK Posts: 3,394	Re: Thanks Jerry's gaskets I appreciate y'all (my best Okie typing interpretation). __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.

08-09-2011	#6
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,904	Re: Thanks Jerry's gaskets Hi Jerry. I really hope you realize just how much you're appreciated. The help you gave me on the 88 was amazing. Brett __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project

08-09-2011	#7
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Thanks Jerry's gaskets Jerry thanks for what you do. GC __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

08-09-2011	#8
ZR1Vette Join Date: Dec 2007 Location: Reston, Virginia Posts: 939	Re: Thanks Jerry's gaskets Another for Jerry... saved me delaying an oil change this week and he does not even know it. Several years ago when I was changing out all fluids/injectors/ whatever & etc on my ZR-1 I got my gaskets et al from Jerry...he said I need to replace the oil drain plug O ring/gasket and he sent me two...just for the next time I need and did not even charge me for the second one. That second one is the one I used this week __________________ Michael :cheers: [I][SIZE="2"]1990 RED on RED #566[/SIZE][/I] [I][SIZE="2"]WAZOO MEMBER[/I][/SIZE]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode