FS: random bunch of parts - ZR-1 Net Registry Forums

Aurora40 · 04-03-2011

Shipping costs to be whatever they actually are, probably $5-10 for any bundle of smaller things.

Anything with a part number is brand new in the GM packaging unless otherwise stated.

Anything in grey is sold.

Steering piece (horn wire is held in by this) 26047013: $15

thepartsladi "Delphi" fuel pump assembly (new): $150

fuel pump gasket 25091503: $10

fuel filler boot NLA 14076115: $30
PCV "F" duct I bought new a couple years ago and used, still firm rubber: $40
PCV "F" duct, the original, soft, and didn't seal well (used ziptie to hold it tight on valves): $10
PCV bottom hose, original from the car but worked fine: $30

PCV elbows 14078872 x 3: $6 each

MAP sensor bracket NLA (new, but not in a GM bag): $35
Wheel locks w/ key: $40
brake pins NLA 10140666 x 2: $10 each
brake clips 10132842 x 2: $5 each
braided brake line from master cyl NLA 10222294, I believe it's made by Vintage Parts, though I bought it from a GM dealer.: $70
Earl's braided brake lines, both fronts, right rear, brand new. Will fit any year ZR-1, but it's the early year style, no goofy spring things on the fronts: $20 each
Standard Products VSS SC8, new: $35

I also have a wheel and tire that is part of the '08+ CTS spare tire kit. Wheel is a 5-spoke 18x4" and should clear lots of brake setups. Tire is T135/70-R18 and is the same overall height as the factory tires. The hub needs to be bored out slightly, the CTS uses a narrower hub than the Corvette. I never got around to doing that, and don't want to now in case a CTS guy wants to buy it. I can get pictures and details if there is any interest. Spare tire kit from GM is $250-300 P/N: 19179359 (includes a jack, wrench, trunk tray but I've used those in my CTS), I'd like to get $100 plus shipping for just the wheel and tire (they are separate, never been mounted).

GOLDCYLON · 04-03-2011

I''l take the elbows are these the ones that go into the side between the cam covers and the plenum ? And the brake pins and clips?

Aurora40 · 04-03-2011

The elbows are the small ones that come out of the injector housings. Not the large ones that come out of the valley breather box.

GOLDCYLON · 04-03-2011

Quote:

Originally Posted by Aurora40

The elbows are the small ones that come out of the injector housings. Not the large ones that come out of the valley breather box.

Those are the ones I want. the 90 degree elbows that come out of the IJHs

-=Jeff=- · 04-03-2011

Bob,

this :
thepartsladi "Delphi" fuel pump assembly (new): $150

is sending unit and all?

Let me know shipping to 60103

Aurora40 · 04-03-2011

Quote:

Originally Posted by -=Jeff=-

Bob,

this :
thepartsladi "Delphi" fuel pump assembly (new): $150

is sending unit and all?

Let me know shipping to 60103

Yes, the whole assembly. I'm guessing it'd be like $10-15 to ship. I can let you know after I ship it what it cost, and you can send me a check then, if you'd like.

VetteMed · 04-03-2011

Fuel filler boot - is this new? If so I'll take it.

Aurora40 · 04-04-2011

fuel pump is still available

GOLDCYLON · 04-09-2011

Bob thanks I received the parts. ALL mint in GM bags.

VetteMed · 04-09-2011

Same here, mint condition NOS!

04-03-2011	#1
Aurora40 Join Date: May 2005 Location: Leesburg, VA Posts: 2,713	FS: random bunch of parts Shipping costs to be whatever they actually are, probably $5-10 for any bundle of smaller things. Anything with a part number is brand new in the GM packaging unless otherwise stated. Anything in grey is sold. Steering piece (horn wire is held in by this) 26047013: $15 thepartsladi "Delphi" fuel pump assembly (new): $150 fuel pump gasket 25091503: $10 fuel filler boot NLA 14076115: $30 PCV "F" duct I bought new a couple years ago and used, still firm rubber: $40 PCV "F" duct, the original, soft, and didn't seal well (used ziptie to hold it tight on valves): $10 PCV bottom hose, original from the car but worked fine: $30 PCV elbows 14078872 x 3: $6 each MAP sensor bracket NLA (new, but not in a GM bag): $35 Wheel locks w/ key: $40 brake pins NLA 10140666 x 2: $10 each brake clips 10132842 x 2: $5 each braided brake line from master cyl NLA 10222294, I believe it's made by Vintage Parts, though I bought it from a GM dealer.: $70 Earl's braided brake lines, both fronts, right rear, brand new. Will fit any year ZR-1, but it's the early year style, no goofy spring things on the fronts: $20 each Standard Products VSS SC8, new: $35 I also have a wheel and tire that is part of the '08+ CTS spare tire kit. Wheel is a 5-spoke 18x4" and should clear lots of brake setups. Tire is T135/70-R18 and is the same overall height as the factory tires. The hub needs to be bored out slightly, the CTS uses a narrower hub than the Corvette. I never got around to doing that, and don't want to now in case a CTS guy wants to buy it. I can get pictures and details if there is any interest. Spare tire kit from GM is $250-300 P/N: 19179359 (includes a jack, wrench, trunk tray but I've used those in my CTS), I'd like to get $100 plus shipping for just the wheel and tire (they are separate, never been mounted). __________________ Bob Saveland Former owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img] Last edited by Aurora40; 04-28-2011 at 08:33 PM.

04-03-2011	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: FS: random bunch of parts I''l take the elbows are these the ones that go into the side between the cam covers and the plenum ? And the brake pins and clips? __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

04-03-2011	#3
Aurora40 Join Date: May 2005 Location: Leesburg, VA Posts: 2,713	Re: FS: random bunch of parts The elbows are the small ones that come out of the injector housings. Not the large ones that come out of the valley breather box. __________________ Bob Saveland Former owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img]

04-03-2011	#5
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: FS: random bunch of parts Bob, this : thepartsladi "Delphi" fuel pump assembly (new): $150 is sending unit and all? Let me know shipping to 60103 __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

04-03-2011	#7
VetteMed Join Date: Mar 2009 Location: Orlando, FL Posts: 1,828	Re: FS: random bunch of parts Fuel filler boot - is this new? If so I'll take it. Last edited by VetteMed; 04-03-2011 at 11:46 PM.

04-04-2011	#8
Aurora40 Join Date: May 2005 Location: Leesburg, VA Posts: 2,713	Re: FS: random bunch of parts fuel pump is still available __________________ Bob Saveland Former owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img]

04-09-2011	#9
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: FS: random bunch of parts Bob thanks I received the parts. ALL mint in GM bags. __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

04-09-2011	#10
VetteMed Join Date: Mar 2009 Location: Orlando, FL Posts: 1,828	Re: FS: random bunch of parts Same here, mint condition NOS! __________________ 2004 Z06/Z16 LeMans Commemorative Edition 1991 ZR-1 #302 White/Gray (sold) 1991 ZR-1 #1147 Red/Saddle (sold)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode