|
02-28-2011
|
#1 |
|
Join Date: Jul 2010
Location: Calgary Alberta
Posts: 191
|
Tensioner Question
While I was replacing the water pump, I noticed that the tensioner pulley is sounding a bit dry.
After exahausting the search function, I've learned that the tensioners can also loosen up over time. So is there a tensioner assembly available anywhere?? The sources that were quoted in past threads are no longer available. Worst case, new pulley/bearing I guess. Thanks for the help,
__________________
[SIZE=1][SIZE=2]Tyler[/SIZE] [SIZE=1]1993 ZR-1 - Polo Green[/SIZE] [/SIZE] |
|
|
|
02-28-2011
|
#2 |
|
Join Date: Jun 2010
Location: back in lone pine
Posts: 591
|
Re: Tensioner Question
i had this problem not long ago with the pully couldnt find one so bill b. pressed in a new bearing for me .
|
|
|
|
|
02-28-2011
|
#3 |
|
Join Date: Nov 2010
Location: Dallas, TX
Posts: 198
|
Re: Tensioner Question
When I bought my car, the seller had a tensioner for it in a box in one of the back storage bins. He knew it was going out. I just had it installed a couple weeks ago and no more squeaky belt!
The Corvette shop that did the work for me tells me the parts are available, but pricey. In other words, I was fortunate to have that part!
__________________
[B]1990 Corvette ZR-1 (#1930) Red/Black, Stock Engine, Henderson Performance custom ECM, FIC Injectors, B&B exhaust, Kenwood DNX6160[/B] Other Rides: 1992 Pontiac Firehawk (#010), 1967 Pontiac GTO 1998 Porsche 968, 2000 Harley Davidson FXST 1986 Pontiac Trans Am, 1931 Ford Model A Tudor Deluxe |
|
|
|
|
02-28-2011
|
#4 |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Tensioner Question
New pulleys w/bearing are available Dayco PN 89003, and will cure the vast majority of problems. The tensioner is not available as new.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
03-02-2011
|
#5 | |
|
Join Date: Jul 2010
Location: Calgary Alberta
Posts: 191
|
Re: Tensioner Question
Quote:
I will try to track one down and get it put on while the car is decommissioned. Another cold snap has hit with -37c temps, so plenty of time for a new pulley to arrive.
__________________
[SIZE=1][SIZE=2]Tyler[/SIZE] [SIZE=1]1993 ZR-1 - Polo Green[/SIZE] [/SIZE] |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
