The phoenix rising - Page 4 - ZR-1 Net Registry Forums

LGAFF · 02-02-2011

There was someone that did what you are talking about pics were on digital corvettes site...

sammy · 02-02-2011

Quote:

Originally Posted by XfireZ51

Brad,

My thought is to paint the top portion of the plenum in the same wrinkle red, leaving the center depression in silver as in the cam covers. The runners, coolant tubes and IHs would be done in silver.

dom thats sounds awsome . i am sorry for the loss of your blue baby, but in the end,at least to me you ended up trading up, getting to put on the ported heads ,detailing things out just perfect and ending up with the best color zr1 of all . enjoy that fine ride and can hardly wait to see what she does hp wise with your new set up /

Kevin · 02-02-2011

Quote:

Originally Posted by XfireZ51

I appreciate the input. I believe it may sound more complex than it would look. I'm not a proponent of single color LT-5s, except for possibly all silver.
Overall I think it looks too "heavy". I'm looking to accent the motor. Maybe my
Photoshop guru =Jeff= can whip something together to indicate what it would look like.

I've seen motors that have color 1, color 2, color one set ups and they just don't turn me on, that being said some one color set ups don't turn me on either. I really really like the crinkle coated red, if it was my car i'd do the entire engine crinkle coated red, and the letters/numbers black with silver hardware and if i could find them black wires. I'm sure your engine will turn out to be a really good looking piece, what makes the automotive world great, we all like diggerent things

-=Jeff=- · 02-02-2011

Quote:

Originally Posted by XfireZ51

I appreciate the input. I believe it may sound more complex than it would look. I'm not a proponent of single color LT-5s, except for possibly all silver.
Overall I think it looks too "heavy". I'm looking to accent the motor. Maybe my
Photoshop guru =Jeff= can whip something together to indicate what it would look like.

I am not that good

would need a shot of a silver motor to attempt it

GOLDCYLON · 02-03-2011

I cant remember whos running the red motor with the polished pieces? Was it jeffs? That may give you some styling cues Dom. I like the crinkle finish!!!

-=Jeff=- · 02-03-2011

Quote:

Originally Posted by GOLDCYLON

I cant remember whos running the red motor with the polished pieces? Was it jeffs? That may give you some cues Dom. I like the crinkle finish!!!

this one:

GOLDCYLON · 02-03-2011

Quote:

Originally Posted by -=Jeff=-

this one:

Yep thats the Beauty!!!!

GOLDCYLON · 02-03-2011

Dom you need one of those LT4 Billet Oil filler caps that Cliff, Phil and I are running. Very cheap on Ebay and look great. They come in Gun metal and Chrome billet with the mobil one insert. Just an Idea. Would offset the stainless hardware nicely you have to ask for the mobil one insert. Props to Cliff he found these.

sammy · 02-03-2011

those look awsome .where can i order one ?

XfireZ51 · 02-03-2011

Very cool. Great idea!

02-02-2011	#31
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: The phoenix rising There was someone that did what you are talking about pics were on digital corvettes site... __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

02-03-2011	#35
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: The phoenix rising I cant remember whos running the red motor with the polished pieces? Was it jeffs? That may give you some styling cues Dom. I like the crinkle finish!!! __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 02-03-2011 at 12:50 AM.

02-03-2011	#38
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: The phoenix rising Dom you need one of those LT4 Billet Oil filler caps that Cliff, Phil and I are running. Very cheap on Ebay and look great. They come in Gun metal and Chrome billet with the mobil one insert. Just an Idea. Would offset the stainless hardware nicely you have to ask for the mobil one insert. Props to Cliff he found these. __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 02-03-2011 at 12:58 AM.

02-03-2011	#39
sammy Join Date: Jun 2010 Location: back in lone pine Posts: 591	Re: The phoenix rising those look awsome .where can i order one ?

02-03-2011	#40
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,708	Re: The phoenix rising Very cool. Great idea!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode