ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 01-23-2011   #11
todesengel
 
Join Date: Apr 2010
Location: O'Fallon, Mo
Posts: 738
Default Re: Electronics upgrade report

Quote:
Originally Posted by GTOger View Post
I thought about remote start but couldn't think of a good way to get it done SAFELY. How did you handle the transmission issue so that you can be certain that, under ANY CIRCUMSTANCES, the car will not start in gear?
There is a sequence you have to go through prior to shutting the car down. The car has to be shut off in nuetral with the e-brake on. If you do not follow the steps the remote start will not work
todesengel is offline   Reply With Quote
Old 01-23-2011   #12
GTOger
 
Join Date: Nov 2010
Location: Dallas, TX
Posts: 198
Default Re: Electronics upgrade report

But somebody could later put the car in gear after the shutdown sequence has been done? Just speaking for myself here, but I can't take the risk that maybe I'll unwittingly forget, or that somehow - however unlikely - the car could be placed into gear. That's why I decided to forgo the convenience. It's not like I'm leaving it out in the cold winter and need to warm it up for 10 minutes in the morning while I have my coffee.
__________________
[B]1990 Corvette ZR-1 (#1930)
Red/Black, Stock Engine, Henderson Performance custom ECM, FIC Injectors, B&B exhaust, Kenwood DNX6160[/B]
Other Rides:
1992 Pontiac Firehawk (#010), 1967 Pontiac GTO
1998 Porsche 968, 2000 Harley Davidson FXST
1986 Pontiac Trans Am, 1931 Ford Model A Tudor Deluxe
GTOger is offline   Reply With Quote
Old 01-23-2011   #13
todesengel
 
Join Date: Apr 2010
Location: O'Fallon, Mo
Posts: 738
Default Re: Electronics upgrade report

Quote:
Originally Posted by GTOger View Post
But somebody could later put the car in gear after the shutdown sequence has been done? Just speaking for myself here, but I can't take the risk that maybe I'll unwittingly forget, or that somehow - however unlikely - the car could be placed into gear. That's why I decided to forgo the convenience. It's not like I'm leaving it out in the cold winter and need to warm it up for 10 minutes in the morning while I have my coffee.
well if the door is not locked the remote start will not work anyway. If someone unlocks, then locks it back it still will not start.

I am different than a lot of you in I drove my vette everywhere, in all weather (except snow). There is something nice about being in a shopping mall in July and starting it before you get out and the car being cool. Guess I am just too much of a pansy.
todesengel is offline   Reply With Quote
Old 01-23-2011   #14
GTOger
 
Join Date: Nov 2010
Location: Dallas, TX
Posts: 198
Default Re: Electronics upgrade report

I'd never say pansy to a guy that drives the car. The wife & I traded the '69 Z28, which was cool but we NEVER drove, for the ZR-1. A/C, power steering, halfway decent seats, overall drivability won out. We use the ZR-1 as a daily driver. The beast was meant to be driven, so who are we to out-think the engineers?

Sounds like you've taken good precautions on the remote start. I still wouldn't do it because I'm sure I could find a way to have the car remote start its way into a brick wall. I'm really good at stuff like that.
__________________
[B]1990 Corvette ZR-1 (#1930)
Red/Black, Stock Engine, Henderson Performance custom ECM, FIC Injectors, B&B exhaust, Kenwood DNX6160[/B]
Other Rides:
1992 Pontiac Firehawk (#010), 1967 Pontiac GTO
1998 Porsche 968, 2000 Harley Davidson FXST
1986 Pontiac Trans Am, 1931 Ford Model A Tudor Deluxe
GTOger is offline   Reply With Quote
Old 01-25-2011   #15
EvanZR1
 
EvanZR1's Avatar
 
Join Date: Nov 2010
Location: Omaha
Posts: 403
Default Re: Electronics upgrade report

Cool, I've been looking for somebody in N. Dallas to do my 91 ZR-1. Want the keyless, and full stereo setup, so it looks like I've found the source now.
EvanZR1 is offline   Reply With Quote
Old 01-25-2011   #16
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Electronics upgrade report

Looks great another option is the Viper 211HV. Ive been running that on two C4s now for about 5 years. No issues

__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 01-25-2011   #17
GTOger
 
Join Date: Nov 2010
Location: Dallas, TX
Posts: 198
Default Re: Electronics upgrade report

Quote:
Originally Posted by EvanZR1 View Post
Cool, I've been looking for somebody in N. Dallas to do my 91 ZR-1. Want the keyless, and full stereo setup, so it looks like I've found the source now.
Talk to Steven over there. He's a good kid and treats the customer and the car with respect. You know some places just look at the car as an "old Corvette" and roll their eyes. Steven took the time to walk through what the goals were and then made some recommendations based on what the wife and I told him. I'll say this: we took the car to a bunch of other shops as well, big and small. The pricing at Earmark was right in line and we had a good feeling about the people there. I hung around while the installer built the sub box and got the car buttoned up. They're good guys.

If you want me to answer any specific questions about what I had done and what it cost, probably best to PM me.
__________________
[B]1990 Corvette ZR-1 (#1930)
Red/Black, Stock Engine, Henderson Performance custom ECM, FIC Injectors, B&B exhaust, Kenwood DNX6160[/B]
Other Rides:
1992 Pontiac Firehawk (#010), 1967 Pontiac GTO
1998 Porsche 968, 2000 Harley Davidson FXST
1986 Pontiac Trans Am, 1931 Ford Model A Tudor Deluxe
GTOger is offline   Reply With Quote
Old 01-25-2011   #18
GTOger
 
Join Date: Nov 2010
Location: Dallas, TX
Posts: 198
Default Re: Electronics upgrade report

Here's what I got the boot screen to do:


My phone doesn't take such great pics so here's the original image:


And this is what I'm going to put in as the new background that goes behind all the radio etc stuff:
__________________
[B]1990 Corvette ZR-1 (#1930)
Red/Black, Stock Engine, Henderson Performance custom ECM, FIC Injectors, B&B exhaust, Kenwood DNX6160[/B]
Other Rides:
1992 Pontiac Firehawk (#010), 1967 Pontiac GTO
1998 Porsche 968, 2000 Harley Davidson FXST
1986 Pontiac Trans Am, 1931 Ford Model A Tudor Deluxe
GTOger is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:22 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020