Crank Sensor Problem?!

After the car was Send to *PRO CZECH MECHANIC yesterday he told me the crank sensor have no signal ,that why the engine not start! ohh yaa, and before 2 months,he told me when he put new spark plugs ,the engine start! and he left the car since then, till before 2 weeks from now,and he call me,and told me the car again not started and he found the Starter (bearing) Rotor damage! COOL! new starter changed before year, by the way!
(I remeber i told him its impossibe the issue is Spark plug ,and i post it here in forum ).

ok.... lets get in the story, the PRO guy,call me again befor 4 days and said the engine wont start after fixing the starter.WAAW!!
he said my Z made him nervous!! ohh realy, who should be piss off and nervous now??!
Guys, i start to hate this car,and wish to burn it,and finish it! I have no luck with this Z.

last year,i lost my chance and enjoy my holiday and sticking with my brothers in Prague Corvette Gathering, and now again this 2009 gathering 18 July , i will lost it,and have no fun !!!
So any one know where to get Crack Sensor to put end to this tragic story, Maybe if there isnt any other real issue NOT the CS problem.
what do you think is going on? any idea?
the car is 500 Km away from City where i am.

Update:
Anyone have Used (good) Module, Ignition Control, its black box. for 1990 Zr-1 .
as the Mechanic told me, the Crank sensor is OK!
I need the Part to be send as soon as pssible.
If you are sure you have a good one, and SURE you will send it Via Global express Mail to Czech Rep. (it takes 3-4 days)
then let me know. and we will talk about the payment.

If i havent got it, then i have to order New one from Curt.

[tccrab]

Hadi:

There's one on eBay, Item number: 400061584235
But be prepared for a little surprise, the starting bid is $550.00

That being said, it doesn't sound like your "Pro Czech Mechanic" knows his azz from a hole in the ground.
Put the car into a container and ship it to someone who actually knows what they're doing.


TomC
"Crabs"

Originally Posted by tccrab

Hadi:

There's one on eBay, Item number: 400061584235
But be prepared for a little surprise, the starting bid is $550.00

That being said, it doesn't sound like your "Pro Czech Mechanic" knows his azz from a hole in the ground.
Put the car into a container and ship it to someone who actually knows what they're doing.


TomC
"Crabs"

Curt sell it for $980 , i just talked to curt today about my issue,maybe he will give me lower price, dont know yet!
Container??
Ohh Tom..., then i have to Ship it to USA the Only place who take care of my Zr1
This guy, have Zr1 manual shop, he already fix DIS-4 MSD ignition system before year for my Z.,
I dont know what happend to his Head, maybe VODKA??!

As you see the ignition Module is sticking under the plenum.
So how possible this became wet and damaged by water presuure cleaning?

[tccrab]

Hadi:



TomC
"Crabs"

Update:
after ordering the new Ign. module and replaced it with old one, the engine still did not start!
Thanks for Pete he was within to find out the problem NO START during cranking.
I am going to post what i sent PETE, so you share the topic with me.
The Czech Mechanic sent me this info:
fuel pressure its 50psi,but injector no opened,no signal of ECU.
crank sensor terminal A+ C on DIS 990 ohms and crank engine voltage its 0.55V
and for 2 3way conector for coil no signal A and B only C its ground OK."

He send me just now masege saying that the plug connector is in,and its fine! hmm.
PETE you Said that you can run MSD ignition without needing for orginal Ign. module?? is this what you mean?! i need to know.
If i am runing the MSD DIS-4 system, i dont need the orginal ign. module? they are not working in the same time? if i UNpluged the Connector runing from ign. module to coil, with MSD DIS-4 the engine should run?
Let me know this info.
Hadi

[4DSZR1]

Check the plug coming out of the coil pack that's low and on the back of the block....