92 just went kabloom - ZR-1 Net Registry Forums

LGAFF · 06-26-2009

Sitting in traffic coming home from Bloomington Gold, somthing, really let loose clutch pedal is to the floor....(limp) and car was trying to lurch forward.

No fluids....I am guessing slave or throwout bearing....

Any thoughts?

Sgreg · 06-26-2009

Sorry to hear of the malfunction. Lee, just curious, did you buy one of those knock off slave cylinders ? I don't think it is the slave but if you bought one and it went bad, let us know.

LGAFF · 06-26-2009

Thats the original.....its OEM...car has 21.5K miles on it

rhipsher · 06-26-2009

I hate to hear that Lee. Unfortunately it sounds like the clutch fork may have sliped off the throwout bearing. Of course check to make sure the clip that holds your clutch peddle to the master cylinder rod didn't pop off and check the slave. But if those check out "THROWOUT BEARING". This has happened to me twice. The first time at 65,000 miles it just snapped in half. The second time it happened I think was because in the proccess of trying to stab the pilot bushing I may have gotten the fork cocked eyed. But if you have to, definately use a transmission jack and make some 12mm studs. Cut the heads off them. Its the best way to guide the tany in. Plus it almost guarantees that you stab the pilot bushing. Ever since I did it that way I havent had a problem and it shifts better than before.

Of course this is what it looks like when your done.

LGAFF · 06-26-2009

Thanks, this will my first adventure with trans/clutch removal

XfireZ51 · 06-27-2009

I have a trans Jack from my ZF-6 Transplant.

flyin ryan · 06-27-2009

Quote:

Originally Posted by LGAFF

Thanks, this will my first adventure with trans/clutch removal

Good times ahead

,... we'll it could be worse...seriously

rhipsher · 06-27-2009

Quote:

Originally Posted by LGAFF

Thanks, this will my first adventure with trans/clutch removal

Ryans right. It could be allot worse. Like engine problems. If your one of the guys that do it for a living like Jeff Flint ,Corey or Mark H. then you can have it done in a matter of hours. But if you have a real job like the rest of us Hehehe! and you do this stuff after work or weekends then you want to take your time and learn as you go along.

WB9MCW · 07-03-2009

Boy Gaffer ur having fun now --

Funny how you were just asking abt tranny removal the other day

U must of had a premonition

WB9MCW · 07-03-2009

Time to go Fidanza and Ceramic Baby !!!!

06-26-2009	#1
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	92 just went kabloom Sitting in traffic coming home from Bloomington Gold, somthing, really let loose clutch pedal is to the floor....(limp) and car was trying to lurch forward. No fluids....I am guessing slave or throwout bearing.... Any thoughts? __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

06-26-2009	#2
Sgreg Join Date: Aug 2006 Location: Texas Posts: 518	Re: 92 just went kabloom Sorry to hear of the malfunction. Lee, just curious, did you buy one of those knock off slave cylinders ? I don't think it is the slave but if you bought one and it went bad, let us know. __________________ 1991 ZR-1, Black, Black, # 541

06-26-2009	#3
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: 92 just went kabloom Thats the original.....its OEM...car has 21.5K miles on it __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

06-26-2009	#4
rhipsher Join Date: Aug 2008 Location: Houston 90 Red ZR-1 Posts: 2,320	Re: 92 just went kabloom I hate to hear that Lee. Unfortunately it sounds like the clutch fork may have sliped off the throwout bearing. Of course check to make sure the clip that holds your clutch peddle to the master cylinder rod didn't pop off and check the slave. But if those check out "THROWOUT BEARING". This has happened to me twice. The first time at 65,000 miles it just snapped in half. The second time it happened I think was because in the proccess of trying to stab the pilot bushing I may have gotten the fork cocked eyed. But if you have to, definately use a transmission jack and make some 12mm studs. Cut the heads off them. Its the best way to guide the tany in. Plus it almost guarantees that you stab the pilot bushing. Ever since I did it that way I havent had a problem and it shifts better than before. Of course this is what it looks like when your done. Last edited by rhipsher; 06-26-2009 at 09:18 PM.

06-26-2009	#5
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: 92 just went kabloom Thanks, this will my first adventure with trans/clutch removal __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

06-27-2009	#6
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,708	Re: 92 just went kabloom I have a trans Jack from my ZF-6 Transplant.

07-03-2009	#9
WB9MCW Join Date: Dec 2003 Location: McHenry, Il. Posts: 6,607	Re: 92 just went kabloom Boy Gaffer ur having fun now -- Funny how you were just asking abt tranny removal the other day U must of had a premonition __________________ http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif "The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC " We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln

07-03-2009	#10
WB9MCW Join Date: Dec 2003 Location: McHenry, Il. Posts: 6,607	Re: 92 just went kabloom Time to go Fidanza and Ceramic Baby !!!! __________________ http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif "The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC " We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln