coilover sprind adjust tool where ..... - ZR-1 Net Registry Forums

jonszr1 · 06-09-2009

can i get one .at a reasonable price / are they all the same or do i need some dimensions? can anyone help me out .thanx for any help

-=Jeff=- · 06-10-2009

spanner wrench??

I got mine at Speedway Motors for around $10

WVZR-1 · 06-10-2009

If your coil-over nuts have just tangs/notches then most any will do. The one -=Jeff=- mentions is quite inexpensive and should do. If they're just round nuts with drilled holes you might want a specialty one to keep from destroying the finish.

I had some early Carrera that used the round drilled nuts. The spanner that I have for the QA-1's I've got wouldn't catch them. The hook was to large. If you've round drilled nuts you want a Joe's Spanner with a round pin!

06-09-2009	#1
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,407	coilover sprind adjust tool where ..... can i get one .at a reasonable price / are they all the same or do i need some dimensions? can anyone help me out .thanx for any help

06-10-2009	#2
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: coilover sprind adjust tool where ..... spanner wrench?? I got mine at Speedway Motors for around $10 __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

06-10-2009	#3
WVZR-1 Join Date: Oct 2004 Posts: 1,890	Re: coilover sprind adjust tool where ..... If your coil-over nuts have just tangs/notches then most any will do. The one -=Jeff=- mentions is quite inexpensive and should do. If they're just round nuts with drilled holes you might want a specialty one to keep from destroying the finish. I had some early Carrera that used the round drilled nuts. The spanner that I have for the QA-1's I've got wouldn't catch them. The hook was to large. If you've round drilled nuts you want a Joe's Spanner with a round pin!