Looking for NLA head parts

[tpepmeie]

I need the following parts, and they are NLA from GM. Jeff, I heard from Locobob that you did a run of cam retainers. Can you post or PM me on those?

10067713 retainer, camshaft (4)...these are the "bearing cap"-like things securing the cams.
11514259 bolt, camshaft retainer (16)

10067515 plug, cylinder head (2)

10106161 pin, camshaft sprocket locator (4)
10090569 washer, camshaft sprocket (4)
10199079 retainer, camshaft sprocket (4) double-flat 93-up

Thanks,
Todd

[Polo-1]

back of the line mr.

Jeff has the retainers. I heard hey look REALLY nice.

Todd, I have the retainers. These are new made out of billet. I will get some pics up tomorrow and a write up on them. I have both the thrust retainer and the rear retainer.

I also have the sprocket pins and the head plugs.

[tpepmeie]

Awesome, Jeff. Looking forward to it. I need all of those items you mentioned.

Know where to get the 40mm black plastic (?) plugs for the end of the cam covers? Another vendor has them at $25 ea x 8. Seems a little unreasonable, but he has them, I don't!

Todd

[LGNDLT5]

Originally Posted by tpepmeie

I need the following parts, and they are NLA from GM.
10106161 pin, camshaft sprocket locator (4)

Thanks,
Todd

Hi Todd. Please check your PM. John

[tpepmeie]

Bump.

Got the cam pins, still need the rest.

Todd

Todd, pictures tonight with the retainers on a head.

Todd, here you go. And how soon do you need the rest. I'm looking into making the double flat and also the sprocket done.

http://www.zr1netregistry.com/forum/...ad.php?p=57971

[tpepmeie]

Jeff,
outstanding. They look great. I found the sprockets through GM, for a price. But I'll definitely need the double flat pieces, and those black end thingy's.

Not in a terrible hurry, as the heads are still at the porter's. Oh, and I don't have the bottom end done (started?) yet either. This is going to be a long project....

PM me a price if these are ready to go, otherwise I'll wait till they go into production.

Cheers,
Todd