Seat Switch... - ZR-1 Net Registry Forums

Scrrem · 03-16-2009

Is it possible to switch the driver and passenger seats. I have some wear marks starting on the drivers seat from the previous owner. I would like to even out the wear a bit. If so, is it easier to switch the cusions or unbold the entire seat?
Rich

jonszr1 · 03-16-2009

yes , alot of us have done it .its not hard at all will take you about an hr. 4 bolts and 3 connecters on each seat and poof you have a nice drivers seat. too bad the aftermarket only sells the seat covers in pairs .

Scrrem · 03-16-2009

Quote:

Originally Posted by jonszr1

yes , alot of us have done it .its not hard at all will take you about an hr. 4 bolts and 3 connecters on each seat and poof you have a nice drivers seat. too bad the aftermarket only sells the seat covers in pairs .

Cool, at a glance, it looked pretty straight forward. I just wanted to make sure GM didn't want to make thing interesting by making different electrical connectors between driver and passenger seats

You know these engineers!
Thanks
Rich

xlr8nflorida · 03-16-2009

Can't you just take the seat cushions out and swap them, should take 15 minutes max?

jonszr1 · 03-16-2009

he may have an upper bolster wear deal that he want to get rid of .

Scrrem · 03-16-2009

Quote:

Originally Posted by jonszr1

he may have an upper bolster wear deal that he want to get rid of .

Exactly right. With all the air mechanisms, I figured I would do less damage and just swap the enire seat....in theory

Rich

Norsky4360 · 03-17-2009

Good to know. I may do the swap b4 the driving season arrives. I know the current right seat has had less use than the left.

03-16-2009	#1
Scrrem Join Date: Feb 2009 Location: Alexandria, Virginia Posts: 1,467	Seat Switch... Is it possible to switch the driver and passenger seats. I have some wear marks starting on the drivers seat from the previous owner. I would like to even out the wear a bit. If so, is it easier to switch the cusions or unbold the entire seat? Rich __________________ 1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member

03-16-2009	#2
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,407	Re: Seat Switch... yes , alot of us have done it .its not hard at all will take you about an hr. 4 bolts and 3 connecters on each seat and poof you have a nice drivers seat. too bad the aftermarket only sells the seat covers in pairs .

03-16-2009	#4
xlr8nflorida Join Date: May 2008 Location: USA Posts: 1,096	Re: Seat Switch... Can't you just take the seat cushions out and swap them, should take 15 minutes max?

03-16-2009	#5
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,407	Re: Seat Switch... he may have an upper bolster wear deal that he want to get rid of .

03-17-2009	#7
Norsky4360 Join Date: Feb 2007 Location: Colorado Posts: 115	Re: Seat Switch... Good to know. I may do the swap b4 the driving season arrives. I know the current right seat has had less use than the left. __________________ [IMG]http://www.c3vr.com/member_uploads/401_500/419/thorsten_norge.gif[/IMG] [B][I]Jim O. [COLOR=white]..............[/COLOR][IMG]http://www.c3vr.com/forum/smileys/smiley27.gif[/IMG] [IMG]http://www.c3vr.com/member_uploads/401_500/419/driving1.gif[/IMG] "[COLOR=red]The Toys[/COLOR]" [/I][/B] ...'90 ZR-1.......'70 roadster.......'78 Trans Am.... [I][B][URL="http://www.c3vr.com/member_uploads/401_500/419/TheToyII_102_852.jpg"][IMG]http://www.c3vr.com/member_uploads/401_500/419/TheToyII_104_65.jpg[/IMG][/URL] [URL="http://www.c3vr.com/member_uploads/401_500/419/TheToy.jpg"][IMG]http://www.c3vr.com/member_uploads/401_500/419/Itsa70_36a2.jpg[/IMG][/URL] [URL="http://www.c3vr.com/member_uploads/401_500/419/PICT3106a.JPG"][IMG]http://www.c3vr.com/member_uploads/401_500/419/PICT3106a_sig.JPG[/IMG][/URL] [/B][/I] (click on each to see a larger version) [I][B][COLOR=red]Save the Wave...!!! [IMG]http://www.c3vr.com/images/smilesani/wavey.gif[/IMG][/COLOR][/B][/I]