Product Introduction - ZR-1 Net Registry Forums

01-06-2009

http://forums.*************.com/c4-z...roduction.html

For those who did not see this in the "other" forum. You'll have to fill in the **** for corvette forum

I need a drain plug so I'm going to give it a whirl as it can't hurt in my opinion.

ZR1Vette · 01-06-2009

Craig...
I thought there was some debate over whether or not the size/thread type for the after market Dimple Super oil drain plug would work on the LT-5 engine?? I remember a lot of posts back and forth..or was that resolved?

tomtom72 · 01-06-2009

This just wandered thru my squash.......doesn't autozone or is it NAPA? One of those has our pan plug & washer. I seem to remember that from another thread.

tom

01-06-2009

Quote:

Originally Posted by ZR1Vette

Craig...
I thought there was some debate over whether or not the size/thread type for the after market Dimple Super oil drain plug would work on the LT-5 engine?? I remember a lot of posts back and forth..or was that resolved?

Apparently WVZR-1 and others discovered the error with the listing and Magdana checked with the manufacturer so it is corrected as shown. I'm ordering one and can post the results of fitment as soon as I get mine.

https://ssl37.chi.us.securedata.net/...products_id=30

He is offering free shipment for Corvette forum members and imagine the same for here.

WVZR-1 · 01-06-2009

I actually just brought an M16 drain plug home to confirm the "no fit" in a new pan! The seller was relying on information from his supplier and mentioned it was "under study" after I posted my "doubts"! From the time of my post to the acknowledgement of the "error" on their part they edited all of the information to reflect the correct size 5/8-18 in less than three days I believe. It often doesn't happen that way! That was a "good job" on their part.

I wouldn't say it was "debated"! I'd say the fit was confirmed and everyone went about "whatever" it was they were doing beforehand!

ZR1Vette · 01-06-2009

Then I would say all is resolved and looks like we have a aftermarket oil drain plug upgrade

01-07-2009

I asked Joe if he would offer free shipping to ZR-1 Net Registry members and here is his reply for those that are interested:

> From: Joe Johnson <jj@magdana.com>
> Subject: RE: FW: WSC Feedback Info
> To: hawaiizr1@yahoo.com
> Date: Tuesday, January 6, 2009, 4:10 PM
> Craig,
>
> OOPS! there was one check box in my software that I
> missed. Fixed it and I think it will show no shipping.
>
> As to the ZR-1 Net Registry customers, yes they can have
> free shipping too. Same offer on the free Dimple if they
> buy a FilterMAG too. They need to put "ZR-1 Net
> Registry" in the Company Name blank (like you put
> Corvette Forum when you signed up.
>
> Joe
>

01-06-2009	#1
HAWAIIZR-1 Guest Posts: n/a	Product Introduction http://forums.***********.com/c4-z...roduction.html For those who did not see this in the "other" forum. You'll have to fill in the ** for corvette forum I need a drain plug so I'm going to give it a whirl as it can't hurt in my opinion. Last edited by HAWAIIZR-1; 01-06-2009 at 02:03 AM.

01-06-2009	#2
ZR1Vette Join Date: Dec 2007 Location: Reston, Virginia Posts: 939	Re: Product Introduction Craig... I thought there was some debate over whether or not the size/thread type for the after market Dimple Super oil drain plug would work on the LT-5 engine?? I remember a lot of posts back and forth..or was that resolved? __________________ Michael :cheers: [I][SIZE="2"]1990 RED on RED #566[/SIZE][/I] [I][SIZE="2"]WAZOO MEMBER[/I][/SIZE]

01-06-2009	#3
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,645	Re: Product Introduction This just wandered thru my squash.......doesn't autozone or is it NAPA? One of those has our pan plug & washer. I seem to remember that from another thread. tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

01-06-2009	#5
WVZR-1 Join Date: Oct 2004 Posts: 1,890	Re: Product Introduction I actually just brought an M16 drain plug home to confirm the "no fit" in a new pan! The seller was relying on information from his supplier and mentioned it was "under study" after I posted my "doubts"! From the time of my post to the acknowledgement of the "error" on their part they edited all of the information to reflect the correct size 5/8-18 in less than three days I believe. It often doesn't happen that way! That was a "good job" on their part. I wouldn't say it was "debated"! I'd say the fit was confirmed and everyone went about "whatever" it was they were doing beforehand!

01-06-2009	#6
ZR1Vette Join Date: Dec 2007 Location: Reston, Virginia Posts: 939	Re: Product Introduction Then I would say all is resolved and looks like we have a aftermarket oil drain plug upgrade __________________ Michael :cheers: [I][SIZE="2"]1990 RED on RED #566[/SIZE][/I] [I][SIZE="2"]WAZOO MEMBER[/I][/SIZE]

01-07-2009	#7
HAWAIIZR-1 Guest Posts: n/a	Re: Product Introduction I asked Joe if he would offer free shipping to ZR-1 Net Registry members and here is his reply for those that are interested: > From: Joe Johnson <jj@magdana.com> > Subject: RE: FW: WSC Feedback Info > To: hawaiizr1@yahoo.com > Date: Tuesday, January 6, 2009, 4:10 PM > Craig, > > OOPS! there was one check box in my software that I > missed. Fixed it and I think it will show no shipping. > > As to the ZR-1 Net Registry customers, yes they can have > free shipping too. Same offer on the free Dimple if they > buy a FilterMAG too. They need to put "ZR-1 Net > Registry" in the Company Name blank (like you put > Corvette Forum when you signed up. > > Joe >