F'n Garage Door - ZR-1 Net Registry Forums

LGAFF · 11-22-2008

Well,

On Friday I get a call from my wife, the garage door will not open, so I leave work early and make my 1.5 hour commute home. Checked the opener and the gear is shot.

Went out today, bought a Craftsman opener. In 1 hour have it installed, then I try to adjust the opening and closing. This is my first install, so I am a novice. Well 6 hours later it still would not open all the way, and it would then get jammed. I tried adjusting the chain, in and out with the damn adjustments.....nothing would work.

Well, finally I opened up the frickin opener......only to find that apparently someone at the factory didn't bother to put a pin in a gear. Once I use a clip to hold the gear in place 10 minutes later its perfectly adjusted and the damn door works.

LGAFF
92 ZR1
#234

RICHARD TILL · 11-22-2008

you`re not by yourself. i`ve cussed and recussed a new door all day long.

its 12 ft. wide and 9 ft. tall. after hanging the door i`m having problems getting the rollers that hold the cables at the ends and the spring at the top adjusted correctly. i`ll git er done but "HELL FIRE".

its back to the drawing board bright & early in the morning.

11-22-2008	#1
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	F'n Garage Door Well, On Friday I get a call from my wife, the garage door will not open, so I leave work early and make my 1.5 hour commute home. Checked the opener and the gear is shot. Went out today, bought a Craftsman opener. In 1 hour have it installed, then I try to adjust the opening and closing. This is my first install, so I am a novice. Well 6 hours later it still would not open all the way, and it would then get jammed. I tried adjusting the chain, in and out with the damn adjustments.....nothing would work. Well, finally I opened up the frickin opener......only to find that apparently someone at the factory didn't bother to put a pin in a gear. Once I use a clip to hold the gear in place 10 minutes later its perfectly adjusted and the damn door works. LGAFF 92 ZR1 #234 Last edited by LGAFF; 11-22-2008 at 11:00 PM.

11-22-2008	#2
RICHARD TILL Join Date: Aug 2005 Location: Iuka, Mississippi 38852 Posts: 756	Re: F'n Garage Door you`re not by yourself. i`ve cussed and recussed a new door all day long. its 12 ft. wide and 9 ft. tall. after hanging the door i`m having problems getting the rollers that hold the cables at the ends and the spring at the top adjusted correctly. i`ll git er done but "HELL FIRE". its back to the drawing board bright & early in the morning.