|
|
|
09-01-2008
|
#1 |
 
Join Date: Aug 2004
Location: Spring Grove ,Pa.
Posts: 257
|
Finally fixed the Z.
It started a few months back the Z just didn't feel as strong. I replaced plugs and fuel filter. Still no change so I pulled the plenum and began testing everything. Coils, wires, injectors tested tem all. Installed new injectors, about half were failing. Also installed new plug wires while I was in there. Pcv hose behind plenum had split so I replaced it too. Still just not right. So looked at fuel system pressure seemed to be alittle on the low side. About ten lbs off so after talking to a few friends and experts, I replaced both fuel pumps and the fuel socks. Still not right car just felt off . Only one part of fuel system left, and I did look for a crushed or damaged line. So I replace the regulator and now I have pressure like it should be and it feels like it used to. I sure am glad to be done finally. I really appreciated all the help and input from friends and guys on the net, Thank you all. I won't take it to a dealer to many bad experiences with those guys and vettes.
 
__________________
91 Turquoise Metallic Haibeck 525 #0134 |
|
|
|
09-01-2008
|
#2 | |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Finally fixed the Z.
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
09-01-2008
|
#3 |
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Excellent!
Thanks for the update. Betcha feel purdy good 'bout now, huh?
(I know I always do!) P. |
|
|
|
|
09-01-2008
|
#4 |
|
Banned
BANNED
Join Date: Oct 2006
Location: MD
Posts: 3,690
|
Re: Finally fixed the Z.
Great news!
Keep all that in mind when others are saying they have the same problems.... Wow you did alot of legwork on getting it right!
|
|
|
|
|
09-01-2008
|
#5 |
 
Join Date: Dec 2003
Location: S. Florida
Posts: 2,667
|
Re: Finally fixed the Z.
It sounds like you needed to get some of the other issues taken care of anyway. I am glad to hear you finally got it running right, and can enjoy it again.
|
|
|
|
|
09-01-2008
|
#6 |
Join Date: Dec 2003
Location: McHenry, Il.
Posts: 6,607
|
Re: Finally fixed the Z.
CONGRAT'S ZW1 -- Glad ur baby is back purrrrrrrrrrin well for u again!
Job well done!!! Did u go with the Accels?
__________________
http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif "The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC " We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln |
|
|
|
|
09-01-2008
|
#7 |
|
Join Date: Aug 2004
Location: Spring Grove ,Pa.
Posts: 257
|
Re: Finally fixed the Z.
Yes I installed the Accels, I'm very pleased with the results. I found an issue with the secondary pump getting moisture inside of the pump. I had replaced it last summer and had to do it again a short while ago. It had been raining here Friday night when I pulled the plenum to do the regulator. I drove car home from work that evening and when I was done and had finished the job I proceeded to check the pressure ,all looked good. I started the car and let it run for a few minutes ,and when I went to cycle the key again the pump stayed on. I know all lines were hooked up so I pulled the line apart by the the oil filter and when I blocked it off it was still running. I pulled the pump and it had just enough moisture to short it out and keep running. So I cleaned it out with contact cleaner and dried it out. I ran a vacuum line from the bottom of the pump to the engine compartment, away from the bottom of the bumper and any moisture. The last pump had totally filled up with water. I was wondering if anybody has ever seen this before.
 
__________________
91 Turquoise Metallic Haibeck 525 #0134 |
|
|
|
|
09-02-2008
|
#8 |
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
|
Re: Finally fixed the Z.
My OE pump fell to water/moisture ingestion also and after I cleaned it up I did a vac hose w/a filter on the port that it uses for exhaust as I figured that the air/moisture was getting in that way....
 ...it was an open plastic nipple so I figured that has to be the way moisture was getting inside the motor area. I used my spare 2* control filter.....so far, so good & it's been about two yrs. 
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
 |
|
|
Hybrid Mode
