|
|
|
08-12-2008
|
#1 |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
radar detector placement V1???
Due to Arizona's agressive continued plan of photo enforcement
 I had to increase my personal protection measures to cover those times when passing slower traffic so I can return to a compliance speed and reset the cruise control. Ahem (less than 11 Miles over the posted limit).  No really !!!  This is the first radar detector I have ever purchased. S0 I picked a used V1 unit last night over at CF. Ok fellow ZR-1 owners I need some opinions on Valentine V1 placement. Yes I know about the cut out. But with my RFID gate badge placement (damn thing wont work unless in the cutout lol) and now my GPS and Sirius Antenna placement under the center sunload vent area of the cutout as well. So frankly the area is getting a little damn crowded!!!!  So heres the question is anyone using a V1 mounted before the mirror and hard wired into the mirror as a power point? I need to know from my brothers if this works for you or is it degraded performance as I suspect. Also any ideas you folks have out there on the subject. I also ordered the hidden unit display any thoughts on mounting that as well? I know this is a bold assumption that my fellow ZR-1 brothers use ahem radar protection!!!  Help GC
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 08-12-2008 at 12:37 PM. |
|
|
|
08-12-2008
|
#2 | |
|
Join Date: Nov 2005
Location: nw louisiana
Posts: 100
|
Re: radar detector placement V1???
Quote:
|
|
|
|
|
|
08-12-2008
|
#3 |
|
Guest
Posts: n/a
|
Re: radar detector placement V1???
|
|
|
|
08-13-2008
|
#4 | |
|
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: radar detector placement V1???
Quote:
Flush mount or did you cut the bezel Jeff?
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
08-13-2008
|
#5 |
|
Guest
Posts: n/a
|
Re: radar detector placement V1???
Bought a spare base car bezel and cut it. My original is sitting in a lock box
|
|
|
|
08-13-2008
|
#6 | |
 
Join Date: Dec 2003
Location: S. Florida
Posts: 2,667
|
Re: radar detector placement V1???
Quote:
|
|
|
|
|
 |
|
|
Hybrid Mode
