If I get the Samco Hoses, Does it Replace ALL Hoses AND Does It Include New Clamps? - ZR-1 Net Registry Forums

Lowflight · 02-11-2008

I found my collant leak and want to replace ALL hoses and get new clamps and everything. The ZR-1 store is kinda vague about the clamps (nothing)

Lowflight · 02-11-2008

Also, how do I find out if they have BLACK in stock NOW? I can't wait 6-8 weeks.

bobbyhi · 02-11-2008

Go to the NetRegistry store and you can puchase them now (if in stock) and the clamps are extra. 6 hoses are included which is all you need..

Lowflight · 02-11-2008

Thanks, but where do I get the clamps?

Lowflight · 02-11-2008

Nevermind, my computer was cutting off the bottom part that had the CLAMPS..found em

phrogs · 02-11-2008

I dont think that you "need" the clamps but it cant hurt I guess

A26B · 02-11-2008

Actually, there are 2 more short hoses that should be given attention also. they are on the tube on the pass side of the plenum and supply coolant for the plenum @ the throttle body.

Personal experience: I had one split, on the inboard side and blew at least a gallon under the plenum. More went in than could drain out. Starter shorted from 12V stud to block. Amazingly, it sat for an hour or so while I was replacing the hose and started right up with push-start. Drove home, sat for a few days before it ever quit dripping coolant from the valley drain. Starter worked, but I didn't want all that moisture there so pulled plenum, replaced starter (arc blew hole in 12V stud insulator) cleaned coil pak base & all wiring connectors & silicon lubed everything. Never a problem.

Moral of the story is.... don't forget those 2, small hoses. They get old too!

Wish someone would get a stick or 2 of the right size Samco hose. I would sure buy a piece.

Aurora40 · 02-11-2008

FYI, it is not "all" hoses. It's all the clamped coolant ones. But there are still small hoses from the side of the plenum, the crimped ones off the remote pressurized reservior, heater core lines, etc that aren't included.

Lowflight · 02-11-2008

Just need the clamp coolant ones. I just hope that whoever I bought them from the Store has them in stock

A1990 · 02-11-2008

Quote:

Originally Posted by Lowflight

Just need the clamp coolant ones. I just hope that whoever I bought them from the Store has them in stock

Harold check with Mike. I bought two different sets. One was from the store. He should have most of that one left.

02-11-2008	#1
Lowflight Join Date: Aug 2005 Location: Memphis TN Posts: 201	If I get the Samco Hoses, Does it Replace ALL Hoses AND Does It Include New Clamps? I found my collant leak and want to replace ALL hoses and get new clamps and everything. The ZR-1 store is kinda vague about the clamps (nothing)

02-11-2008	#2
Lowflight Join Date: Aug 2005 Location: Memphis TN Posts: 201	Re: If I get the Samco Hoses, Does it Replace ALL Hoses AND Does It Include New Clamp Also, how do I find out if they have BLACK in stock NOW? I can't wait 6-8 weeks.

02-11-2008	#3
bobbyhi Join Date: Jul 2005 Location: Mendota Heights, MN. 55120 Posts: 984	Re: If I get the Samco Hoses, Does it Replace ALL Hoses AND Does It Include New Clamps? Go to the NetRegistry store and you can puchase them now (if in stock) and the clamps are extra. 6 hoses are included which is all you need.. __________________ Bob Anderson 1990 #2405 White/Gray Haibeck chip,4:09 gears,Power Effects Exhaust,5 spoke chrome,C5 brakes,49th Street rockers,K&N,Hurst,Headers,Upper & lower ported Minnesota State Director Founding Member #19

02-11-2008	#4
Lowflight Join Date: Aug 2005 Location: Memphis TN Posts: 201	Re: If I get the Samco Hoses, Does it Replace ALL Hoses AND Does It Include New Clamp Thanks, but where do I get the clamps?

02-11-2008	#5
Lowflight Join Date: Aug 2005 Location: Memphis TN Posts: 201	Re: If I get the Samco Hoses, Does it Replace ALL Hoses AND Does It Include New Clamp Nevermind, my computer was cutting off the bottom part that had the CLAMPS..found em

02-11-2008	#6
phrogs Join Date: Jul 2004 Location: Kalamazoo MI Posts: 1,753	Re: If I get the Samco Hoses, Does it Replace ALL Hoses AND Does It Include New Clamps? I dont think that you "need" the clamps but it cant hurt I guess __________________ JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything.

02-11-2008	#7
A26B Join Date: Dec 2003 Location: Arcadia,OK Posts: 3,394	Re: If I get the Samco Hoses, Does it Replace ALL Hoses AND Does It Include New Clamps? Actually, there are 2 more short hoses that should be given attention also. they are on the tube on the pass side of the plenum and supply coolant for the plenum @ the throttle body. Personal experience: I had one split, on the inboard side and blew at least a gallon under the plenum. More went in than could drain out. Starter shorted from 12V stud to block. Amazingly, it sat for an hour or so while I was replacing the hose and started right up with push-start. Drove home, sat for a few days before it ever quit dripping coolant from the valley drain. Starter worked, but I didn't want all that moisture there so pulled plenum, replaced starter (arc blew hole in 12V stud insulator) cleaned coil pak base & all wiring connectors & silicon lubed everything. Never a problem. Moral of the story is.... don't forget those 2, small hoses. They get old too! Wish someone would get a stick or 2 of the right size Samco hose. I would sure buy a piece. __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.

02-11-2008	#8
Aurora40 Join Date: May 2005 Location: Leesburg, VA Posts: 2,713	Re: If I get the Samco Hoses, Does it Replace ALL Hoses AND Does It Include New Clamps? FYI, it is not "all" hoses. It's all the clamped coolant ones. But there are still small hoses from the side of the plenum, the crimped ones off the remote pressurized reservior, heater core lines, etc that aren't included. __________________ Bob Saveland Former owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img]