Rear hatch weatherstrip replacement - ZR-1 Net Registry Forums

Sgreg · 01-07-2008

I seem to recall someone on the Registry recently replaced their rear hatch weatherstrip. I am considering doing the work myself if it isn't too complicated. Any advice would be appreciated.

01-07-2008

Greg, it's fairly simple.

Open the hatch. Get a broomstick or long piece of 2x4 to prop the hatch open. Take a flat blade screw driver and pull the tang out of the hatch strut on both ends.

Pull the hatch surround trim off and then you are free to start pulling the weatherstrip off. It has a tacky paste holding it in place, and can create a mess.

When installing the new piece, I recomend starting at one of the corners and working around from there. Also make sure the rubber is warm and pliable.

Sgreg · 01-07-2008

Thanks, Jeff.

Is the old sticky stuff enough to restick the new weathershrip or do I need an adhesive ?

01-07-2008

The new weatherstrip will have it in the groove already. You can wipe the excess of the carr with a paper towel.

Hammer · 01-07-2008

Greg,

I replaced mine last year with an aftermarket piece from this guy. It was a 1/4 of the GM piece and it worked very well and was pretty easy to install. Thought I would take a chance and try it for the price. There were a couple guys at the PNW Gathering that were considering replacing theirs also but I don't know if they did or not.

http://www.tld-corvette.com/products.asp?dept=918

Sgreg · 01-07-2008

Thanks, guys. I am ready to tackle it. Got to be easier than a plenum pull !!

4DSZR1 · 01-08-2008

Quote:

Originally Posted by Hammer

Greg,

I replaced mine last year with an aftermarket piece from this guy. It was a 1/4 of the GM piece and it worked very well and was pretty easy to install. Thought I would take a chance and try it for the price. There were a couple guys at the PNW Gathering that were considering replacing theirs also but I don't know if they did or not.

http://www.tld-corvette.com/products.asp?dept=918

I was one of the guys... I will say that John's came out fantastic, and this is on my to-do list for sure. I Did the brake flush last week and hooked up a new Battery Tender last night, so I'm getting down the list.

01-07-2008	#1
Sgreg Join Date: Aug 2006 Location: Texas Posts: 518	Rear hatch weatherstrip replacement I seem to recall someone on the Registry recently replaced their rear hatch weatherstrip. I am considering doing the work myself if it isn't too complicated. Any advice would be appreciated. __________________ 1991 ZR-1, Black, Black, # 541

01-07-2008	#2
Jeffvette Guest Posts: n/a	Re: Rear hatch weatherstrip replacement Greg, it's fairly simple. Open the hatch. Get a broomstick or long piece of 2x4 to prop the hatch open. Take a flat blade screw driver and pull the tang out of the hatch strut on both ends. Pull the hatch surround trim off and then you are free to start pulling the weatherstrip off. It has a tacky paste holding it in place, and can create a mess. When installing the new piece, I recomend starting at one of the corners and working around from there. Also make sure the rubber is warm and pliable.

01-07-2008	#3
Sgreg Join Date: Aug 2006 Location: Texas Posts: 518	Re: Rear hatch weatherstrip replacement Thanks, Jeff. Is the old sticky stuff enough to restick the new weathershrip or do I need an adhesive ? __________________ 1991 ZR-1, Black, Black, # 541

01-07-2008	#4
Jeffvette Guest Posts: n/a	Re: Rear hatch weatherstrip replacement The new weatherstrip will have it in the groove already. You can wipe the excess of the carr with a paper towel.

01-07-2008	#5
Hammer Join Date: Apr 2006 Location: Ideho Posts: 2,653	Re: Rear hatch weatherstrip replacement Greg, I replaced mine last year with an aftermarket piece from this guy. It was a 1/4 of the GM piece and it worked very well and was pretty easy to install. Thought I would take a chance and try it for the price. There were a couple guys at the PNW Gathering that were considering replacing theirs also but I don't know if they did or not. http://www.tld-corvette.com/products.asp?dept=918 __________________ [I][FONT=Comic Sans MS]John Boyd[/FONT][/I] [I][FONT=Comic Sans MS][SIZE=1]Ideho[/SIZE][/FONT][/I] [FONT=Comic Sans MS][SIZE=1][I]2015 ZL1 [/I][I]Camaro #1121 BLACK/BLACK 6 SPD (540 RWHP)[/I][/SIZE][/FONT] [I][FONT=Comic Sans MS][SIZE=1]1991 ZR-1 #458 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK 72[/COLOR]k miles ([B][COLOR=red]SOLD[/COLOR][/B]) 1991 ZR-1 #473 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK [/COLOR]37k miles ([B][COLOR=red]SOLD[/COLOR][/B])[/SIZE][/FONT][/I]