36mm Ball Gage - ZR-1 Net Registry Forums

XfireZ51 · 10-26-2007

OK. Winter is coming and the project is porting the IH/Plenum and heads. Where do you get the famous 36mm ball gage to check port size?

-=Jeff=- · 10-27-2007

http://www.mcmaster.com/

There are a couple close on that website..

cuisinartvette · 10-27-2007

THink I bought both a 36 and 37, or 36 and 38, cant remember. Makes a hell of a weapon when dumped in a sock, too.

8upZR1 · 10-27-2007

I was looking for one of those, but couldn't find it on Mcmaster website. Do you remember what name they are listed under?

Ccmano · 10-27-2007

The heads? Are you doing the just the port matching or going after the whole head to improve flow?

Hans

XfireZ51 · 10-27-2007

Hans,

At this point, looking to port match them.

-=Jeff=- · 10-27-2007

Quote:

Originally Posted by Ccmano

The heads? Are you doing the just the port matching or going after the whole head to improve flow?

Hans

For the heads it is almost worth it to send them out..

kenthompson · 11-01-2007

Quote:

Originally Posted by -=Jeff=-

http://www.mcmaster.com/

There are a couple close on that website..

Can't find any that are 36 MM, but 1 7/16" gets awfully close

Pete · 11-01-2007

Quote:

Originally Posted by kenthompson

Can't find any that are 36 MM, but 1 7/16" gets awfully close

I agree 1 7/16" is just shy of 36.5 mm
Dom,if you order from Mcmaster order me a 1 7/16" i'll pay you for it.

Thanks
Pete

XfireZ51 · 11-01-2007

Quote:

Originally Posted by Pete

I agree 1 7/16" is just shy of 36.5 mm
Dom,if you order from Mcmaster order me a 1 7/16" i'll pay you for it.

Thanks
Pete

OK.

kenthompson,

Under what category did you find that in the catalog? Do you have the link?

10-26-2007	#1
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,708	36mm Ball Gage OK. Winter is coming and the project is porting the IH/Plenum and heads. Where do you get the famous 36mm ball gage to check port size?

10-27-2007	#2
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: 36mm Ball Gage http://www.mcmaster.com/ There are a couple close on that website.. __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

10-27-2007	#3
cuisinartvette Join Date: Aug 2005 Location: San Fernando Valley, CA. Posts: 896	Re: 36mm Ball Gage THink I bought both a 36 and 37, or 36 and 38, cant remember. Makes a hell of a weapon when dumped in a sock, too. __________________ 1990 ZR1, 142,000 miles-Black on black 4.09's Haibeck chip, 3"exh, K&N, meth inj.

10-27-2007	#4
8upZR1 Join Date: Jun 2006 Location: Thunderbolt, Ga. Posts: 253	Re: 36mm Ball Gage I was looking for one of those, but couldn't find it on Mcmaster website. Do you remember what name they are listed under? __________________ IT IS THE FATE OF THE INNOCENT TO MEET WITH DEATH!!!

10-27-2007	#5
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Re: 36mm Ball Gage The heads? Are you doing the just the port matching or going after the whole head to improve flow? Hans __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold.

10-27-2007	#6
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,708	Re: 36mm Ball Gage Hans, At this point, looking to port match them.