|
![]() |
#1 |
![]() Join Date: Nov 2016
Location: New Brunswick
Posts: 961
|
![]()
Hey folks.
Whats the best place to get the backup light switch? Rock Auto doesn't list it. Neither did Jerrys. Thanks
__________________
1990 ZR-1 # 996 "All Corvettes are red. The rest are mistakes." - John Heinricy |
![]() |
![]() |
![]() |
#2 |
![]() ![]() Join Date: May 2010
Location: Japan
Posts: 3,572
|
![]()
I don?t know if Zip is the best, but I am happy with mine from them. If you are a veteran ask for their military discount too.
https://www.zip-corvette.com/89-96-6...ht-switch.html Sent from my iPhone using ZR-1 Net Registry
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 ![]() |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Jan 2021
Location: Beautiful Bavaria
Posts: 522
|
![]()
If I remember correctly I got mine from corvette central via their ebay store. Works well and much easier to install thanks to the extended wiring harness.
__________________
ZR-1 #638/1991 |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Nov 2016
Location: New Brunswick
Posts: 961
|
![]()
Zip, Ecklers and Corvette Central are out of stock. All coming in shortly, but today would be much better.
__________________
1990 ZR-1 # 996 "All Corvettes are red. The rest are mistakes." - John Heinricy |
![]() |
![]() |
![]() |
#5 |
![]() Join Date: Aug 2012
Location: Ellicott City, MD
Posts: 1,726
|
![]()
You might want to take out the current switch and clean it. Mine started working again after freeing up the ball and socket.
__________________
Charlie __________ Dredgeguy WAZOO Member 1992 Bright Red/Black ZR1 #246 Dana 4:10 gears Polished LT5 by Haibeck Polished Fikse FM5's with Michelin Pilot Sport 2 Stainless Works headers and cats with Corsa |
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Jan 2021
Location: Beautiful Bavaria
Posts: 522
|
![]()
Or try to place a penny into the hole. My old switch worked well but the trigger point has move "into" the switch over the years. So the small engagement rod wouldn't push the ball far enough.
Just make sure you use a shim that's magnetic or can somehow else be removed once you have a replacement.
__________________
ZR-1 #638/1991 |
![]() |
![]() |
![]() |
#7 |
![]() Join Date: May 2007
Location: Addison IL
Posts: 250
|
![]()
Lectric Limited has the switch. PN 10159402.
https://www.lectriclimited.com/ |
![]() |
![]() |
![]() |
|
|