|
|
|
06-05-2022
|
#1 |
 
Join Date: Sep 2016
Location: Ocala, FL
Posts: 894
|
Where to get front shock bushings
My project yet has an operational FX3 system. However the front shocks go clankity clank. Need the upper two flat round rubber isolator bushings and the lower can shaped bushing the bolt goes through. Need them for both sides. Any ideas? Keeping another legend alive.
__________________
Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much. |
|
|
|
06-05-2022
|
#2 |
|
Join Date: Jun 2012
Location: fort worth
Posts: 181
|
Re: Where to get front shock bushings
Dorman 31018 or 31019 might work
|
|
|
|
|
06-05-2022
|
#3 |
|
Join Date: Sep 2016
Location: Ocala, FL
Posts: 894
|
Re: Where to get front shock bushings
That is a path for the lower end of the shock. How about the upper end?
__________________
Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much. |
|
|
|
|
06-06-2022
|
#4 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,682
|
Re: Where to get front shock bushings
can that lower shock mount bracket be pressed out to replace that lower bushing?
|
|
|
|
|
06-06-2022
|
#5 |
|
Join Date: Sep 2016
Location: Ocala, FL
Posts: 894
|
Re: Where to get front shock bushings
I am hoping to pressure wash all the grease off front suspension tonight to get a shock out and further examine. My thought is if it was pressed in it can be pressed out!
__________________
Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much. |
|
|
|
|
06-06-2022
|
#6 |
|
Join Date: Jun 2012
Location: fort worth
Posts: 181
|
Re: Where to get front shock bushings
I doubt the lower shock bushing is bad. It's the uppers that tend to get worn. I'd suggest pulling the shock out and inspecting it before buying anything. Autozone and/or O'Reilly will have a Dorman upper bushing that will work.
|
|
|
|
|
06-07-2022
|
#7 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,682
|
Re: Where to get front shock bushings
Quote:
|
|
|
|
|
|
06-07-2022
|
#8 |
|
Join Date: May 2021
Location: Freeburg IL
Posts: 55
|
Re: Where to get front shock bushings
I just got some from corvette central. They have the front and the rear in stock.
|
|
|
|
|
06-08-2022
|
#9 |
|
Join Date: Sep 2016
Location: Ocala, FL
Posts: 894
|
Re: Where to get front shock bushings
Corvette Central is the place! The lower bushing on right shock fell right out. The left shock is fine. Thanks to all contributors for the help.
__________________
Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much. |
|
|
|
|
06-08-2022
|
#10 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,682
|
Re: Where to get front shock bushings
I don't see where they sell shock bushings unless they're part of an overall suspension package.
|
|
|
|
 |
|
|
Hybrid Mode
