ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 03-17-2022   #1
Mr.Yuck
 
Join Date: Nov 2014
Location: WI
Posts: 121
Default Tachometer wire location

I'm Installing a Raptor shift light in the vent on my 1993 Z. Anyone know where the tach wire location is or what Color the tach wire is or the pin number? Thank you for any help in advance.

Sent from my SM-N981U using ZR-1 Net Registry mobile app
Mr.Yuck is offline   Reply With Quote
Old 03-19-2022   #2
Mr.Yuck
 
Join Date: Nov 2014
Location: WI
Posts: 121
Default Re: Tachometer wire location

Ding, Ding, Ding, The white wire is the answer. Many choices on where you can tap into it. Underneath the dash off the cluster wiring harness or through the firewall at the ECM or at the connector going to the coils. Thanks again for all the help from absolutely nobody. For anyone looking to install a shift light. Here's what I did. I Installed it in the vent to the right of the cluster. Made a small hole inside the vent then ran the wires down and
tapped into everything under the dash. Found a 12V wire with KOEO, grounded on a bracket, taped into the white tach wire in cluster harness. Works like a charm. Screenshot_20220319-090213_Photos.jpg

Sent from my SM-N981U using ZR-1 Net Registry mobile app
Mr.Yuck is offline   Reply With Quote
Old 03-19-2022   #3
conesare2seconds
 
Join Date: Jul 2016
Location: Greater St. Louis
Posts: 490
Default Re: Tachometer wire location

Thanks for sharing this info, even if you didn?t really feel like it.
conesare2seconds is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:30 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020