|
![]() |
#1 |
![]() Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,180
|
![]()
I have always liked the look of the euro taillights decided to make my own. Image1612670934.818280.jpg
Sent from my iPhone using ZR-1 Net Registry
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,180
|
![]()
Now to make a functional housing and wiring
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
![]() |
![]() |
![]() |
#3 |
Join Date: Dec 2007
Location: Fremont, CA
Posts: 3,087
|
![]()
Lee,the wiring is easy,the wire you need is already in the harness and stops at the rear bulkhead. I got some OEM connectors, installed a terminal in the open cavity in the plug,made the wiring harness for the lights,done. Here's the sketchy part,when your 3rd brake light circuit goes out at the switch,you have no brake lights. I did mine years ago,can't remember every detail but if you need a hand get in touch.
|
![]() |
![]() |
![]() |
#4 | |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,683
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#5 |
Join Date: Nov 2016
Location: New Brunswick
Posts: 960
|
![]()
Look good. How did you do that?
|
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Jan 2012
Location: Wisconsin
Posts: 885
|
![]()
__________________
1990 ZR-1 #2180 Red/Black Many of the usual mods for 460HP, tuned by Marc Haibeck ZR-1 Net Registry Member #1548 ![]() |
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,180
|
![]()
Let me see if I can get the rest to work.....pointless if I cant make the housing, etc....
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
![]() |
![]() |
![]() |
#8 |
Join Date: Dec 2007
Location: Fremont, CA
Posts: 3,087
|
![]()
The bulb sockets for these are specific to the housing and the part number is AC DELCO LS39 and LS96. The wiring at the brake switch has to be modified but I can't remember how,I'm sure somebody will have the info here.
|
![]() |
![]() |
![]() |
#9 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,683
|
![]()
The brake light signal can be had by tapping into the CHMSL circuit. Much easier than doing it at the brake switch.
|
![]() |
![]() |
![]() |
#10 |
![]() Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,180
|
![]()
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
![]() |
![]() |
![]() |
|
|