|
|
|
08-26-2020
|
#1 |
|
Join Date: Jan 2014
Location: NYC
Posts: 28
|
Dual Mass Flywheel Wanted
Hi, does anyone have any leads on a original flywheel for my 90? Perhaps someone has a NOS tucked away?
 Thanks |
|
|
|
08-28-2020
|
#2 | |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Dual Mass Flywheel Wanted
Quote:
https://www.jerrysgaskets.com/flywhe...oem-90-95-0c3/
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
|
08-29-2020
|
#3 |
Join Date: Jul 2004
Location: Kalamazoo MI
Posts: 1,754
|
Re: Dual Mass Flywheel Wanted
Jerry can these be rebuilt?
I have one but I wouldn't say is worth anything other than an anchor.
__________________
JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything. |
|
|
|
|
08-29-2020
|
#4 | |
|
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Dual Mass Flywheel Wanted
Quote:
I don't have any firsthand knowledge of one being rebuilt, but anything that can be built & put together can be taken apart & rebuilt. It become a question of at what cost and is it worth it. You know how it goes with Corvette parts though.... eventually, some day it all becomes valuable again, just not likely in my lifetime.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
|
08-29-2020
|
#5 | |
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,105
|
Re: Dual Mass Flywheel Wanted
Quote:
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" |
|
|
|
|
|
08-29-2020
|
#6 |
|
Join Date: Feb 2008
Location: Newcastle, WA.
Posts: 14
|
Re: Dual Mass Flywheel Wanted
I have a machinist that will resurface the wear/friction surface and I am sure there are several more around the U.S.A. (check any import (german) service center), but getting the elastomer replaced is quite a bit more tricky. Usually the machinist will verify the "play" before resurfacing the wear surface. I personally don't feel comfortable with the elastomer flex limits before it needs to be replaced. Have you ever been to the drag races when a car launched and needed the scatter shield? I am just not willing to gamble like that....
|
|
|
|
 |
|
|
Hybrid Mode
