|
![]() |
#1 |
![]() Join Date: Jan 2005
Location: chattanooga, tn
Posts: 27
|
![]()
OK where do i get one of these......does the local auto parts store have them?
|
![]() |
![]() |
![]() |
#2 |
![]() ![]() Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
![]()
Check with Jerry @ Jerry's Gaskets.com is where I'd look first!
![]()
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Sep 2016
Location: Ocala, FL
Posts: 889
|
![]()
AC Delco 214-358. Amazon or Rock Auto. I am waiting on one from Amazon right now to install this weekend. You do have to cut a spline out of the connector port and swap the bracket. The originals are no longer available.
__________________
Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much. |
![]() |
![]() |
![]() |
#4 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,057
|
![]()
There are 2 types of the solenoid valves,the early type takes a small square foam filter and the later design takes a cylinder type filter. Does anybody know what type of filter this 214-358 takes,looks like the early design.
|
![]() |
![]() |
![]() |
#5 |
![]() ![]() Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,791
|
![]()
Maybe four Solenoid Valves?
Vacuum Solenoid for early (90' under Plenum). Vacuum Solenoid (filter) for Later (95' under Plenum)................Solenoid for Charcoal Canister (91'-95' under Plenum). ![]() ![]() Solenoid located on Charcoal Canister (not shown) under Drivers Headlight (90').
__________________
Left Clickable links ![]() -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 12-05-2019 at 06:26 PM. |
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Sep 2016
Location: Ocala, FL
Posts: 889
|
![]()
214-358 has the square thin filter. The spring steel filter cover snaps on to either the early or late LT5 bracket. Easy peasy. I am doing a 93 MY right now. Test your replacement solenoid before install. I had a bad one that the plastic was malformed inside the nipples.
__________________
Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much. |
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Jan 2005
Location: chattanooga, tn
Posts: 27
|
![]()
Thanks guys!!
|
![]() |
![]() |
![]() |
#8 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,057
|
![]()
The filter for the switch is $13.00. This is for a piece of foam that is maybe 1/8 in thick and is 5/8 by 3/4 of an inch. When I went to the dealer to buy the cylinder shaped filter the parts guy ordered this one instead. I thought it was so absurd to charge $13.00 for such a small piece of foam I paid for it and kept it,shows how smart I am.
|
![]() |
![]() |
![]() |
#9 |
![]() Join Date: Jan 2005
Location: chattanooga, tn
Posts: 27
|
![]()
Just wondering......the OEM part has 3 vacuum ports and the replacement has 3 ports.....how do you make it work?
|
![]() |
![]() |
![]() |
#10 | |
![]() Join Date: Jan 2006
Location: Decatur, AL
Posts: 1,112
|
![]() Quote:
__________________
Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454 |
|
![]() |
![]() |
![]() |
|
|