WTB: 1990 Front Right side OEM wheel / rim - ZR-1 Net Registry Forums

emmvette · 06-06-2019

I'm looking for one front, right (passenger's side) rim for my ZR-1. p/n on the rim is 10119548.
I have a full set but this one won't balance easily. Tire place said it seems to be egg shaped and that it can be balanced but really shouldn't be used. (I had to take it to a second tire place to get this far, the first couldn't balance it).
Doesn't need to be pretty, just functional.

I realize the rears are different on the ZR-1, but the fronts the same for the non ZR-1 to the ZR-1 cars?

I'm located in central Iowa.

Young1 · 06-06-2019

Call Vette2Vette in central IL closest to you. MirrockCorvette is parting a 1990 that has correct wheels on.
My info says base car wheels are 9.5 wide same as ZR-1. Mark and Brook will take care of you.

Side note. I only have my high speed wheels and tires done with the latest Hunter road force equipment and at a local shop that will talk to me. Expensive tires and safety is my concern. I take my daily drivers to the big box chain stores but not my Corvette.

Sent from my iPhone using ZR-1 Net Registry

Mystic ZR-1 · 06-06-2019

If you‘ve got a wheel repair shop nearby,
making it round again would probably be easy
for them and cheaper than a new wheel?

emmvette · 06-06-2019

Young1, yes, I do the same for the ZR-1. These are Hoosiers, mounted by the race shop which should be capable. I ended up taking the one wheel and tire to a local dearership with the Hunter RF balancer and they were able to balance it in 5 minutes but also suggested it shouldn't be used as it is.

I'll check with a local wheel repair shop, as suggested above, tomorrow and see if they think they can help. It still might make me feel better to just get a new wheel if someone has one not in use. I see them on the bay from time to time, but none right now.

GOLDCYLON · 06-12-2019

did you find the wheel or get sorted out yet ? GC

emmvette · 06-13-2019

It's decent for now; I took it to a wheel repair shop and they took some measurements and said it was so close to round that they didn't recommend messing with it. I had it balanced at a dealership with a Road Force Balance machine and they were able to balance it in 2 - 3 minutes.

So I put it back on my car and it tested good. No shimmy or shaking up to 120 mph. These are Hoosiers for the track and I'm not likely to go over that speed on the local tracks. I have two better sets of rims / tires for doing other events on, and they are perfect. So for my standing miles runs and the SORC event, I use a different set of tires that I know are good up past 170 :-)

It's possible the rim is within spec and the tire is too, but both on the ragged edge, making the pair a bad combo. If I see a RF rim on the bay in the future, I'll likely grab it.

06-06-2019	#1
emmvette Join Date: Jul 2013 Location: Central Iowa Posts: 190	WTB: 1990 Front Right side OEM wheel / rim I'm looking for one front, right (passenger's side) rim for my ZR-1. p/n on the rim is 10119548. I have a full set but this one won't balance easily. Tire place said it seems to be egg shaped and that it can be balanced but really shouldn't be used. (I had to take it to a second tire place to get this far, the first couldn't balance it). Doesn't need to be pretty, just functional. I realize the rears are different on the ZR-1, but the fronts the same for the non ZR-1 to the ZR-1 cars? I'm located in central Iowa. __________________ [CENTER][SIZE=4][COLOR=red]1990 ZR-1 Red / Red[/COLOR][/SIZE][/CENTER]

06-06-2019	#2
Young1 Join Date: Sep 2016 Location: Ocala, FL Posts: 895	Re: WTB: 1990 Front Right side OEM wheel / rim Call Vette2Vette in central IL closest to you. MirrockCorvette is parting a 1990 that has correct wheels on. My info says base car wheels are 9.5 wide same as ZR-1. Mark and Brook will take care of you. Side note. I only have my high speed wheels and tires done with the latest Hunter road force equipment and at a local shop that will talk to me. Expensive tires and safety is my concern. I take my daily drivers to the big box chain stores but not my Corvette. Sent from my iPhone using ZR-1 Net Registry __________________ Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much.

06-06-2019	#3
Mystic ZR-1 Join Date: Jan 2010 Location: Mystic CT Posts: 2,633	Re: WTB: 1990 Front Right side OEM wheel / rim If you‘ve got a wheel repair shop nearby, making it round again would probably be easy for them and cheaper than a new wheel?

06-06-2019	#4
emmvette Join Date: Jul 2013 Location: Central Iowa Posts: 190	Re: WTB: 1990 Front Right side OEM wheel / rim Young1, yes, I do the same for the ZR-1. These are Hoosiers, mounted by the race shop which should be capable. I ended up taking the one wheel and tire to a local dearership with the Hunter RF balancer and they were able to balance it in 5 minutes but also suggested it shouldn't be used as it is. I'll check with a local wheel repair shop, as suggested above, tomorrow and see if they think they can help. It still might make me feel better to just get a new wheel if someone has one not in use. I see them on the bay from time to time, but none right now. __________________ [CENTER][SIZE=4][COLOR=red]1990 ZR-1 Red / Red[/COLOR][/SIZE][/CENTER]

06-12-2019	#5
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: WTB: 1990 Front Right side OEM wheel / rim did you find the wheel or get sorted out yet ? GC __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

06-13-2019	#6
emmvette Join Date: Jul 2013 Location: Central Iowa Posts: 190	Re: WTB: 1990 Front Right side OEM wheel / rim It's decent for now; I took it to a wheel repair shop and they took some measurements and said it was so close to round that they didn't recommend messing with it. I had it balanced at a dealership with a Road Force Balance machine and they were able to balance it in 2 - 3 minutes. So I put it back on my car and it tested good. No shimmy or shaking up to 120 mph. These are Hoosiers for the track and I'm not likely to go over that speed on the local tracks. I have two better sets of rims / tires for doing other events on, and they are perfect. So for my standing miles runs and the SORC event, I use a different set of tires that I know are good up past 170 :-) It's possible the rim is within spec and the tire is too, but both on the ragged edge, making the pair a bad combo. If I see a RF rim on the bay in the future, I'll likely grab it. __________________ [CENTER][SIZE=4][COLOR=red]1990 ZR-1 Red / Red[/COLOR][/SIZE][/CENTER]