Samco hose problem

[Tim]

Just wondering if any one has had a problem with the samco hoses. It seems the upper rad. hose is to large and facing the opposite way and the one to the themostat assy is a size to small. Uly can you give me the contact name and # so I can get this straightend out. Thanks

[guinnessdood]

Originally Posted by Tim

Just wondering if any one has had a problem with the samco hoses. It seems the upper rad. hose is to large and facing the opposite way and the one to the themostat assy is a size to small. Uly can you give me the contact name and # so I can get this straightend out. Thanks

Tim....they fit...the ones you're talking about are the tightest of all...use some silicone grease on the inside of the hose and work it very slowly and carefully...but with a bit of force...they go on...stretch stretch stretch!!!

Best instructions I can give, is do most of the assembly work on the bench. mainly the section coming from the crossover pipe. Everything fits just fine, although a little tight. use just a dab of silicone grease or spit will do wonders.

[GrayZ]

great advice..from (2) fellers..that know alot about..spitting in
their hands...

[guinnessdood]

Originally Posted by ITLGO2

great advice..from (2) fellers..that know alot about..spitting in
their hands...

Well...I actually prefer Olive Oil...lasts a long time!!! What do you use Keithy boy? Superglue...just like American Pie? That scene is forever etched in my mind...funny!!!