|
|
|
01-12-2019
|
#1 |
 
Join Date: Aug 2012
Location: Ellicott City, MD
Posts: 1,714
|
Suggestions for Fikse FM5 refinish/paint
I purchased a used set of 17" FM5's this summer and while they were a little rough looking, thought they would clean up OK. Took them to Ye Old Wheel Shop and they did a great job polishing the lip and painting the inside barrels grey but the centers did not clean up very well. Wheels were sitting outside for a few years and well.....you know what can happen.
I am thinking of painting the centers, maybe a bright silver. Any suggestions or thoughts? Thanks,
__________________
Charlie __________ Dredgeguy WAZOO Member 1992 Bright Red/Black ZR1 #246 Dana 4:10 gears Polished LT5 by Haibeck Polished Fikse FM5's with Michelin Pilot Sport 2 Stainless Works headers and cats with Corsa Last edited by dredgeguy; 01-12-2019 at 09:38 PM. Reason: typo |
|
|
|
01-12-2019
|
#2 | |
 Join Date: Aug 2006
Location: McLean, VA
Posts: 3,723
|
Re: Suggestions for Fiske FM5 refinish/paint
Quote:
Last edited by secondchance; 01-12-2019 at 06:08 PM. |
|
|
|
|
|
01-12-2019
|
#3 |
|
Join Date: Aug 2012
Location: Ellicott City, MD
Posts: 1,714
|
Re: Suggestions for Fikse FM5 refinish/paint
They said to polish the centers would be very labor intensive....$$$$. Will go back next week and speak to John as he was not there today and see what options he suggests.
__________________
Charlie __________ Dredgeguy WAZOO Member 1992 Bright Red/Black ZR1 #246 Dana 4:10 gears Polished LT5 by Haibeck Polished Fikse FM5's with Michelin Pilot Sport 2 Stainless Works headers and cats with Corsa Last edited by dredgeguy; 01-12-2019 at 09:40 PM. Reason: typo |
|
|
|
|
01-12-2019
|
#4 |
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Re: Suggestions for Fikse FM5 refinish/paint
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
|
|
|
|
01-12-2019
|
#5 |
|
Join Date: Aug 2012
Location: Ellicott City, MD
Posts: 1,714
|
Re: Suggestions for Fiske FM5 refinish/paint
Hi Phil, these are the before photos from this summer when I purchased them. Will get some more next week showing the polished lip and painted barrel.
__________________
Charlie __________ Dredgeguy WAZOO Member 1992 Bright Red/Black ZR1 #246 Dana 4:10 gears Polished LT5 by Haibeck Polished Fikse FM5's with Michelin Pilot Sport 2 Stainless Works headers and cats with Corsa |
|
|
|
|
01-13-2019
|
#6 | |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Suggestions for Fiske FM5 refinish/paint
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
01-13-2019
|
#7 |
|
Join Date: Aug 2012
Location: Ellicott City, MD
Posts: 1,714
|
Re: Suggestions for Fiske FM5 refinish/paint
That is certainly an option and think it would look good on a red car but right now am leaning towards a bright metallic silver
__________________
Charlie __________ Dredgeguy WAZOO Member 1992 Bright Red/Black ZR1 #246 Dana 4:10 gears Polished LT5 by Haibeck Polished Fikse FM5's with Michelin Pilot Sport 2 Stainless Works headers and cats with Corsa |
|
|
|
|
01-13-2019
|
#8 |
|
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Re: Suggestions for Fikse FM5 refinish/paint
Charlie,
From what I can see with a little elbow grease should be able to polish up just fine. Surely a lot easier than the Fikse Profil 10s I polished awhile back that first required removal of anodized surface treatment. Sent from my iPhone using ZR-1 Net Registry
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
|
|
|
|
01-13-2019
|
#9 |
Join Date: Jan 2012
Location: Florence, SC
Posts: 1,343
|
Re: Suggestions for Fiske FM5 refinish/paint
I had the centers of my Profil 5’s painted a silver color that I found in the ADV-1 site. In all honesty, I like them better now than I did the machined finish. Ye Ole Wheel shop should be able to paint them any color of your choice.
__________________
Jim Zorgias  1994 ZR-1 Admiral Blue/Black #245 1996 Callaway Supernatural 450 1990 Callaway Supernatural 490 / CR-1 #7 |
|
|
|
|
01-17-2019
|
#10 |
|
Join Date: Aug 2012
Location: Ellicott City, MD
Posts: 1,714
|
Re: Suggestions for Fiske FM5 refinish/paint
I was able to catch up with John at Ye Old Wheel Shop and we had a great discussion on options. The decision has been made, I am going to have the centers polished and not painted. Attached photos are how they are now with the barrels painted and the lip polished and centers.....well, not up to snuff. We thought the centers would clean up but the years of sitting outside took a toll on the finish and they need work. I considered painting between the spokes which would have saved a total of $250 but at this point, go big or go home. I am sure I will be happy when they are completed. Ye Old Wheel Shop does outstanding work. Just ask the wheel guru Robert DeMarco
__________________
Charlie __________ Dredgeguy WAZOO Member 1992 Bright Red/Black ZR1 #246 Dana 4:10 gears Polished LT5 by Haibeck Polished Fikse FM5's with Michelin Pilot Sport 2 Stainless Works headers and cats with Corsa |
|
|
|
 |
|
|
Hybrid Mode
