Bilstein FX3 good news... I think - ZR-1 Net Registry Forums

Ccmano · 12-17-2018

For reasons that escape me at the moment I found myself on the Bilstein website yesterday and noticed that they prominently advertise their rebuilding service out of their Poway, CA facility. Like many, it was my understanding that the OEM FX3 damper rebuilding service and revalving had been discontinued. I used the contact element on the site and asked if there had been any change in status for OEM FX3 dampers. To my surprise I received a reply today stating that the service was indeed available. So I pressed them with a second email to confirm that rebuilding was possible. I received a second email back confirming it was possible with only one caveat, that the strut rod was not rebuildable or available should it be needed but that all else can be done. As I read it even revalving can be done.

For clarification I am attaching the emails below. My shocks are good but I’d be interested if anyone has any luck with this. I know there were a few that have been looking.
H

tnova · 12-17-2018

This is great. I lived in Poway until last year and personally talked to them. Good to see their change of position.

Sent from my iPhone using ZR-1 Net Registry

RussMcB · 12-17-2018

Nice find, good to know. Thanks for sharing.

Paul Workman · 12-18-2018

Great news!

Added to my PARTS LIST reference file

tgonyaw · 12-18-2018

Interesting response!
This is a copy of what I received 11-19-18. The same people were on the cc list.--------I also called the North Carolina office and was told the active part numbers are on back order. There aren't any shocks in inventory. I also called Zip Products and was told their FX-3 shocks have been on back order since about February of 2018. I had about decided to do coil-overs, yet it would be nice to keep the car in GM spec and add the Z51/Z07 front and rear springs.

More research to do after the Holidays!
Best Wishes to ALL

Hello,
We can rebuild aftermarket parts only. Anything with a Delco label we cannot service. Approx.. Cost to re-build aftermarket $180.00ea
Thank you for your inquiry.
Kind Regards,
Michael Ritchie
Technical Sales & Warranty Support Expert
thyssenkrupp Bilstein of America, Inc

T: +1 858 386-5909, michael.ritchie@thyssenkrupp.com
thyssenkrupp Bilstein of America, Inc, 14102 Stowe Drive, Poway, CA 92064, USA, www.bilsteinus.com

speed grills · 12-18-2018

EM racing

Vette Guy · 12-18-2018

Bad news for those of us with coilovers.

I contacted them when rebuilding the WC GT car this past summer.... Was 6 - 8 weeks to get an assessment of 'rebuildability' ($170 + price of replacement parts) and then another 4 weeks for the actual rebuild. Not fun when you have coil-overs, and can't simply put a stock shock back in its place temporarily. Fortunately, I had another set cut for coil-overs that I used, else the car would be sitting on the lift for 2 1/2 months with no rear suspension.

Regards,
Mark

12-17-2018	#1
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Bilstein FX3 good news... I think For reasons that escape me at the moment I found myself on the Bilstein website yesterday and noticed that they prominently advertise their rebuilding service out of their Poway, CA facility. Like many, it was my understanding that the OEM FX3 damper rebuilding service and revalving had been discontinued. I used the contact element on the site and asked if there had been any change in status for OEM FX3 dampers. To my surprise I received a reply today stating that the service was indeed available. So I pressed them with a second email to confirm that rebuilding was possible. I received a second email back confirming it was possible with only one caveat, that the strut rod was not rebuildable or available should it be needed but that all else can be done. As I read it even revalving can be done. For clarification I am attaching the emails below. My shocks are good but I’d be interested if anyone has any luck with this. I know there were a few that have been looking. H __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold.

12-17-2018	#2
tnova Join Date: Oct 2013 Location: Spokane Valley, WA Posts: 115	Re: Bilstein FX3 good news... I think This is great. I lived in Poway until last year and personally talked to them. Good to see their change of position. Sent from my iPhone using ZR-1 Net Registry

12-17-2018	#3
RussMcB Join Date: Jan 2015 Location: Marietta, GA USA Posts: 1,160	Re: Bilstein FX3 good news... I think Nice find, good to know. Thanks for sharing.

12-18-2018	#4
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,493	Re: Bilstein FX3 good news... I think Great news! Added to my PARTS LIST reference file __________________ Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry Last edited by Paul Workman; 12-18-2018 at 09:32 AM.

12-18-2018	#5
tgonyaw Join Date: May 2018 Location: VA Posts: 201	Re: Bilstein FX3 good news... I think Interesting response! This is a copy of what I received 11-19-18. The same people were on the cc list.--------I also called the North Carolina office and was told the active part numbers are on back order. There aren't any shocks in inventory. I also called Zip Products and was told their FX-3 shocks have been on back order since about February of 2018. I had about decided to do coil-overs, yet it would be nice to keep the car in GM spec and add the Z51/Z07 front and rear springs. More research to do after the Holidays! Best Wishes to ALL Hello, We can rebuild aftermarket parts only. Anything with a Delco label we cannot service. Approx.. Cost to re-build aftermarket $180.00ea Thank you for your inquiry. Kind Regards, Michael Ritchie Technical Sales & Warranty Support Expert thyssenkrupp Bilstein of America, Inc T: +1 858 386-5909, michael.ritchie@thyssenkrupp.com thyssenkrupp Bilstein of America, Inc, 14102 Stowe Drive, Poway, CA 92064, USA, www.bilsteinus.com

12-18-2018	#6
speed grills Join Date: Jan 2018 Location: oxelösund 61336 sweden Posts: 1	Re: Bilstein FX3 good news... I think EM racing

12-18-2018	#7
Vette Guy Join Date: Jul 2005 Location: San Antonio, TX Posts: 651	Re: Bilstein FX3 good news... I think Bad news for those of us with coilovers. I contacted them when rebuilding the WC GT car this past summer.... Was 6 - 8 weeks to get an assessment of 'rebuildability' ($170 + price of replacement parts) and then another 4 weeks for the actual rebuild. Not fun when you have coil-overs, and can't simply put a stock shock back in its place temporarily. Fortunately, I had another set cut for coil-overs that I used, else the car would be sitting on the lift for 2 1/2 months with no rear suspension. Regards, Mark __________________ Mark Horner President, ZR-1 Net Registry 91 ZR-1 #2016 95 ZR-1 #21 DRM-600, LPE 385