HEY PETE!

[Paul Workman]

When R WE gonna see some dyno sheets of your MEAN GREEN MACHINE w/ the new 391 LT5?

[rkreigh]

Originally Posted by Paul Workman

When R WE gonna see some dyno sheets of your MEAN GREEN MACHINE w/ the new 391 LT5?

big bore shorty stroke should be the bomb in for 540 rwhp


nice




hey pete what do the big closed deck sleeves run? I see AES gets 8500 for a fitted block, but I have an odd ball 3.875 stroke on the old lsv and I want to retain the ti rods which will likely require a custom piston


like to do the twin turbo boogie one of these days, and the closed deck will help there

[FU]

No doubt I would do a closed deck Ron. Do it , now's the time.
But that's just me

[Pete]

Ron closed deck is the way to go for Turbo or Nos.
With your odd ball crank you'll have a 414 ci that would be a monster.
Big bore with some stroke perfect combo.

Pete

Originally Posted by rkreigh

big bore shorty stroke should be the bomb in for 540 rwhp


nice




hey pete what do the big closed deck sleeves run? I see AES gets 8500 for a fitted block, but I have an odd ball 3.875 stroke on the old lsv and I want to retain the ti rods which will likely require a custom piston


like to do the twin turbo boogie one of these days, and the closed deck will help there

[Pete]

Soon Paul.

Pete

Originally Posted by Paul Workman

When R WE gonna see some dyno sheets of your MEAN GREEN MACHINE w/ the new 391 LT5?

[Pete]

Hi Paul
Took "Beast 391" to track yesterday (Great Lakes Dragway).
It was last minute decision did not have my sticky Hoosers.
I was on Nitto Drag Radial i only cared about MPH.
I picked up an average 3.5 MPH.

1.96 60ft
102.4 MPH 1/8
11.30 @ 131.75

1.77 60ft
102.97 MPH 1/8
11.00 @ 131.70
Tried going into 4th.
Previous 1/8 was 99 MPH
I think it has more in it had my shift light set at 7200 i think it might be a bit high need to lower it to either 7000 or 7100 that for next time or when i have a Dyno sheet.

Car picked up 3-4 MPH which tells me it's making more power.
If i had to guess car makes about 520+- RWHP.
I'm very very happy with the results.

I have one video i don't know how to pot it here.
Somebody sent it to me via Mesenger.
I will post it on my FB page.
Next time i'll take my Hoosers for better ET's
Pete

[Pete]

Video is on my YouTube Channel.

https://www.youtube.com/watch?v=G4xSZ1OsYUI


Pete

[Paul Workman]

Originally Posted by Pete

Video is on my YouTube Channel.

https://www.youtube.com/watch?v=G4xSZ1OsYUI


Pete

Pete,
Did you upgrade your spindles to the 31 spline ones (visa vis Bob Gillig's route)?

And, speaking of beefing up the drivetrain, you're using the RAM dual disk setup, yes?

Nice video!

[Pete]

Originally Posted by Paul Workman

Pete,
Did you upgrade your spindles to the 31 spline ones (visa vis Bob Gillig's route)?

And, speaking of beefing up the drivetrain, you're using the RAM dual disk setup, yes?

Nice video!

ThanksPaul
Yes, using RAM dual Disc actually using the first prototype

I do not have the big spindles, yet.

Pete

[gtcollins@maxnet.co.nz]

Hi Pete love the video would like to see more videos

Glen

Sent from my SM-G960F using ZR-1 Net Registry mobile app