My Brakes Don't Seem Fully Release - ZR-1 Net Registry Forums

KJL · 08-16-2018

My brakes seem to grab a bit even when my foot is not on the pedal. My ebrake is off. If my car is in neutral and not in gear, I can not push it. I don't go through brake pads so it is not much but more than I see with my other cars. I expect some drag but not that much. Any thoughts as to what could be the cause?

Dynomite · 08-16-2018

Caliper pistons are sticky and need a cleaning is my first guess.

Slides on Caliper are sticky is second guess.

Remove Calipers and give them a good cleaning and a new coat of red paint when you are there

08-16-2018	#1
KJL Join Date: Mar 2013 Location: Roswell, GA Posts: 234	My Brakes Don't Seem Fully Release My brakes seem to grab a bit even when my foot is not on the pedal. My ebrake is off. If my car is in neutral and not in gear, I can not push it. I don't go through brake pads so it is not much but more than I see with my other cars. I expect some drag but not that much. Any thoughts as to what could be the cause? __________________ 1995 ZR1 #159 Ported,Corsa,4.10 Rear, Dual Disc RAM Clutch, Alum Flywheel, Haibeck Chip, ZFDoc Plates, Relocated Battery 400 rwhp 1992 ZR1 #280 Ported, Locked Secondary's, Flowmaster Exhaust, Haibeck Chip, 375rwhp 1996 Collectors LT4 (Stock) 1972 Convertible 434 Small Block 572 rwhp

08-16-2018	#2
Dynomite Join Date: Aug 2009 Location: South Dakota/California Posts: 3,807	Re: My Brakes Don't Seem Fully Release Caliper pistons are sticky and need a cleaning is my first guess. Slides on Caliper are sticky is second guess. Remove Calipers and give them a good cleaning and a new coat of red paint when you are there __________________ Left Clickable links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 08-16-2018 at 10:53 PM.