ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 07-02-2018   #1
dredgeguy
 
dredgeguy's Avatar
 
Join Date: Aug 2012
Location: Ellicott City, MD
Posts: 1,713
Default Safe high water temp

Last weekend I got stuck on the highway in gridlock traffic. Three hours of 1st gear creeping along with outside temps of 97. My water temp stayed around 225 but at one point went up to a max of 235. When traffic opened up and I got rolling, my temps went back down to 195. I have a new DeWitts radiator put in 1 or 2 years ago.
My question is this, if the temps kept going up, at what point do you pull over and stop the car and give it a chance to cool down? At what temp are you starting to risk engine damage?
Thanks
__________________
Charlie

__________
Dredgeguy
WAZOO Member

1992 Bright Red/Black ZR1 #246
Dana 4:10 gears
Polished LT5 by Haibeck
Polished Fikse FM5's with Michelin Pilot Sport 2
Stainless Works headers and cats with Corsa
dredgeguy is offline   Reply With Quote
Old 07-02-2018   #2
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
Default Re: Safe high water temp

That is a difficult question but this will give you an idea of the absolute high coolant temperature....

Quote:
Originally Posted by Tyler Townsley View Post
You get over 260 for any length of time and depending on the age/miles of the engine bad things begin to happen. The location of the water temp pickup can result in a misleading temp on the guage if there is low water in the motor. It is one of the first locations to see steam vic water which results lower temp reading. You need to watch oil temperature reading too.
Tyler
The key is to keep rpms up over 2,000 rpm to keep coolant flow over 45 gpm more or less. Idling in traffic at lower RPMs just is not enough coolant flow no matter what radiator you have and no matter when your fans come on.....get a Haibeck chip and turn fans on at 205 deg F and off 200 deg F.

Thermostats, Fans, Radiators and Coolant Filling

Last edited by Dynomite; 07-02-2018 at 10:55 PM.
Dynomite is offline   Reply With Quote
Old 07-02-2018   #3
nelson007
 
nelson007's Avatar
 
Join Date: Sep 2012
Location: Westminster, Md.
Posts: 436
Default Re: Safe high water temp

Charlie,
I put 16” Hayden electric fans on all my big blocks. Keeps tems around 205 max.
Nelson
__________________
WAZOO MEMBER

1993 #124 Ruby
1994 #??? Red/Black
1995 #061 Black/Red
2012 ZR1 Preproduction
nelson007 is offline   Reply With Quote
Old 07-02-2018   #4
Ccmano
 
Ccmano's Avatar
 
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
Default Re: Safe high water temp

On a fully stock engine the second fan doesn’t even come on till 234 degrees. Since you topped a 235 sounds like this might have been the case. On a 97 degree day stuck in traffic with the AC on the stock cooling system on these cars is simply tapped out. If it holds under 240 I let it go, anything over 240 I turn the AC off. A Haibeck chip that turns both fans on at 205 will buy you some more time. Ultimately as the ambient temps exceed 100 degrees you will be forced to manually cycle the AC on and off to prevent overheating.

Read Dynomites excellent write up on the subject in the link he attached in his post above. He provides a great synopsis. Even with a radiator upgrade water pump circulation at idle is simply insufficient.
H
__________________
90'ZR-1 #1461 Red/Black
Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold
08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold
05 C6 Z51 Red/Black Sold
90'ZR-1 #1723 Black/Gray Sold but not forgotten
91' Z51 L98 White Vert. My First, you always remember your first. Sold.

Last edited by Ccmano; 07-02-2018 at 11:39 PM.
Ccmano is offline   Reply With Quote
Old 07-03-2018   #5
dredgeguy
 
dredgeguy's Avatar
 
Join Date: Aug 2012
Location: Ellicott City, MD
Posts: 1,713
Default Re: Safe high water temp

Great info and thanks. Looks like I needed to get my RPM's up and I would have been ok.
__________________
Charlie

__________
Dredgeguy
WAZOO Member

1992 Bright Red/Black ZR1 #246
Dana 4:10 gears
Polished LT5 by Haibeck
Polished Fikse FM5's with Michelin Pilot Sport 2
Stainless Works headers and cats with Corsa
dredgeguy is offline   Reply With Quote
Old 07-06-2018   #6
rkreigh
 
Join Date: Jan 2004
Location: Alex VA
Posts: 1,087
Default Re: Safe high water temp

hey Charlie, I just pulled the front cooling stack apart on the old lsv and was surprised to see about 40% clogged up dewitts


I also found a set of stronger fans I'm going to try


with the thick rad, the factory fans aren't strong enough to keep in cool creeping in traffic with the ac on


gets worse as the displacement and compression go up as on the LSV


I'll let you know. for sure DON'T run the car above 245 or you will be doing just what I am. Replacing head gaskets.


As marc explained the car overheats and "crushes" the HG as the alum expands and after a few of these cycles it won't recover and leaks


technically the car isn't "overheated" at that temp but your HG will thank you for running the car below 230


Ask me how I know
__________________
95 390 LPE ZR1 (505 rwhp)
LSV = Lingenfelter Super Vette
Twin Turbo 2003 Z06 (800 RWHP)
rkreigh is offline   Reply With Quote
Old 07-06-2018   #7
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: Safe high water temp

After my secondary fan died in 90* stop and go traffic, it got up to 245*+ a couple times before I pulled over to let it cool. Then the temps surged to ? before cooling off. No problems, but later Marc said I got lucky.

I've installed a screen stretched between the air dam and the radiator to keep the grass etc away. Turns out to be a very good mod indeed!
__________________
Good carz, good food, good friendz = the best of timez!

90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs

Former Secretary, ZR-1 Net Registry
Paul Workman is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:58 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020