thanx to bill boudreau - ZR-1 Net Registry Forums

jonszr1 · 01-09-2007

I had a clutch problem that was driving me nuts . everytime i pushed it in it squelled like a stuck pig. so i called bill. he is one special person . he solved my problem which was a combo of things but took the extra time to checkover fix/and teach me alot of things i had ?s about . Some of them were not even trans related. My car is now for me awsome . the clutch and trans work better than I could ever dream . Now even I can speed shift . If ya want it done right Clutch/trans Go to bill. pricing fair and work first class.=D>

Corvette95 · 01-09-2007

so what was the problem?

jonszr1 · 01-09-2007

the pilot bushing was in too far(from the factoy) the pilot bushing was worn bad . this was the sneeky part if you looked/felt it youd think cool its still good.NOT.the thingy that holds the fork on the ball lost tension causing it to slip and not let the clutch work right . the ball and fork were also worn (sneeky here too). he took the time to show me the whys/effects of each thing . I watched shared stories during the whole process. Rminded me of my old hotrod days/ gettogethers to work on cars. He also spotted and fixed other potental probs .trans yoke worn bad and replaced the u-joints. plus he is almost anal about setting the c beam. my car is dead nuts smooth to 150 anyway. like driving on glass. I tried it on the way home (paniment valley). did it 3 times its soo smooth.

guinnessdood · 01-10-2007

Quote:

Originally Posted by jonszr1

plus he is almost anal about setting the c beam

Umm...Did Bill mention anything about my C-Beam in my car? LoL Holy Crap dude...it took us a long time...and MUCH longer to get that black **** off our hands and hair and arms and anywhere else it touched...Uly

Kevin · 01-10-2007

i really wish i had the money to have bill redue my trans

jonszr1 · 01-10-2007

ully, Ah yes you are folk lore (or is it little black sambo). that black stuff is nasty . showed me the streacher too. Did ron ever get that goo off the floor. He now test fits before the goo is applied.

Bob G · 01-13-2007

What Is His Proceedure For Setting The C Beam

tomtom72 · 01-14-2007

Quote:

Originally Posted by Bob G

What Is His Proceedure For Setting The C Beam

If i remember correctly the procedure is up om his site.

blackjack · 01-14-2007

ron
count me in for a beam plate...the way i drive,i could use one
bj
91/1735

01-09-2007	#1
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,407	thanx to bill boudreau I had a clutch problem that was driving me nuts . everytime i pushed it in it squelled like a stuck pig. so i called bill. he is one special person . he solved my problem which was a combo of things but took the extra time to checkover fix/and teach me alot of things i had ?s about . Some of them were not even trans related. My car is now for me awsome . the clutch and trans work better than I could ever dream . Now even I can speed shift . If ya want it done right Clutch/trans Go to bill. pricing fair and work first class.=D>

01-09-2007	#2
Corvette95 Join Date: Jan 2006 Location: Decatur, AL Posts: 1,119	Re: thanx to bill boudreau so what was the problem? __________________ Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454

01-09-2007	#3
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,407	Re: thanx to bill boudreau the pilot bushing was in too far(from the factoy) the pilot bushing was worn bad . this was the sneeky part if you looked/felt it youd think cool its still good.NOT.the thingy that holds the fork on the ball lost tension causing it to slip and not let the clutch work right . the ball and fork were also worn (sneeky here too). he took the time to show me the whys/effects of each thing . I watched shared stories during the whole process. Rminded me of my old hotrod days/ gettogethers to work on cars. He also spotted and fixed other potental probs .trans yoke worn bad and replaced the u-joints. plus he is almost anal about setting the c beam. my car is dead nuts smooth to 150 anyway. like driving on glass. I tried it on the way home (paniment valley). did it 3 times its soo smooth.

01-10-2007	#5
Kevin Join Date: Jun 2005 Location: pittsburgh Posts: 4,632	Re: thanx to bill boudreau i really wish i had the money to have bill redue my trans __________________ It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B"

01-10-2007	#6
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,407	Re: thanx to bill boudreau ully, Ah yes you are folk lore (or is it little black sambo). that black stuff is nasty . showed me the streacher too. Did ron ever get that goo off the floor. He now test fits before the goo is applied.

01-13-2007	#7
Bob G Join Date: Dec 2005 Location: Huntley IL Posts: 170	Re: thanx to bill boudreau What Is His Proceedure For Setting The C Beam

01-14-2007	#9
blackjack Join Date: Aug 2005 Location: north of montreal Posts: 510	Re: thanx to bill boudreau ron count me in for a beam plate...the way i drive,i could use one bj 91/1735