1990 ZR-1 #849 - ZR-1 Net Registry Forums

epaul77055 · 10-03-2015

Have been working on car since 9:00 am. I changed the oil in transmission, Installed Corsa Cat back system, changed one o2 sensor-Does anyone have any tips for the passenger side; I am not sure where the plug end is--Do I take the insulation off the lower mount to find it? I want to replace the sensor before I take it off of jackstands. Any help would be greatly appreciated. P. Smith

Demps · 10-03-2015

Remove passenger k-frame--4 bolts.
Ted

Z51JEFF · 10-03-2015

Plugging the sensor back in is going to try your patients. The plug is almost up against the block.

10-03-2015	#1
epaul77055 Join Date: Jan 2012 Location: Houston, Texas Posts: 17	1990 ZR-1 #849 Have been working on car since 9:00 am. I changed the oil in transmission, Installed Corsa Cat back system, changed one o2 sensor-Does anyone have any tips for the passenger side; I am not sure where the plug end is--Do I take the insulation off the lower mount to find it? I want to replace the sensor before I take it off of jackstands. Any help would be greatly appreciated. P. Smith

10-03-2015	#2
Demps Join Date: Jan 2006 Location: Niceville Posts: 998	Re: 1990 ZR-1 #849 Remove passenger k-frame--4 bolts. Ted

10-03-2015	#3
Z51JEFF Join Date: Dec 2007 Location: Fremont,Ca Posts: 3,078	Re: 1990 ZR-1 #849 Plugging the sensor back in is going to try your patients. The plug is almost up against the block.