|
|
|
03-08-2015
|
#1 |
|
Join Date: Jan 2014
Location: Macomb twp,Michigan
Posts: 108
|
Sw headers
It's time for headers,getting sw headers just wondering is their different size collectors 2/1-2 ,3".what about converters.if I remove them will your eyes burn from fumes or get high flow cats.I do have flowmaster force cat back 2-1/2 system. Thanks,spring is right around the corner!!
|
|
|
|
03-08-2015
|
#2 |
|
Join Date: Jan 2014
Location: Macomb twp,Michigan
Posts: 108
|
Re: Sw headers
I love the way it sounds with flowmaster force II cat back.quiet at idle and sweet at wot!!.by removing resonator & replace with x pipe & sw headers is it going to be really loud?or keep resonator on.(flowmaster resonator)
|
|
|
|
|
03-09-2015
|
#3 |
 Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,802
|
Re: Sw headers
Unless you get Stainless Works short headers or the clone OBX shorties, the catalyst will need to be compact as there is only so much room in the trans tunnel. The shorties pretty much locate the collectors where the oem cats resided and will be optimal for cats with all the heat shields and extra room there. Collectors will be 3". I used LS7 cats on mine since they are compact 3" factory cats with plenty of rare earths in it to actually do something.
|
|
|
|
|
03-09-2015
|
#4 |
|
Join Date: Feb 2014
Location: AZ
Posts: 860
|
Re: Sw headers
When I installed my OBX headers, I went with no cats. After even a quick 5-minute drive, I'd return with my clothes reeking of exhaust fumes. (And my car was tuned by Marc, so there was nothing wrong with it.) I'd never do that again without cats. Just my 2 cents. Good luck.
|
|
|
|
|
03-09-2015
|
#5 |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Sw headers
On my set of Jeal headers I went with Random Techs Hi Flow cats. For the above reasons and because it was the right thing to do
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
03-09-2015
|
#6 |
|
Join Date: Jan 2014
Location: Macomb twp,Michigan
Posts: 108
|
Re: Sw headers
So if I keep stock cats I need shorty headers?no cats long tube headers?is there any hp gain if I go with high flow cats?im defenatly doing cats just don't no wich rout to go stock or high flow.arent long tube better than the shortys?
Last edited by TomZR1; 03-09-2015 at 05:09 PM. |
|
|
|
|
03-09-2015
|
#7 |
|
Join Date: Jan 2014
Location: Macomb twp,Michigan
Posts: 108
|
Re: Sw headers
1 more thing where is the best place & price to get these sw headers.or is there a better header than sw headers.
|
|
|
|
|
03-10-2015
|
#8 |
|
Join Date: Aug 2014
Location: Kansas City, MO
Posts: 838
|
Re: Sw headers
For SW headers what length o2 extensions are needed?
Are they needed for both sides?
__________________
Looking for a ZR-1 1985 Yamaha RZ350-NOT STOCK 1971 Yamaha AT1-Middle of a restoration Last edited by Billy Mild; 03-10-2015 at 08:20 AM. |
|
|
|
|
03-10-2015
|
#9 |
|
Join Date: Jun 2012
Location: fort worth
Posts: 183
|
Re: Sw headers
I have a set of new Random Tech cats if anyone is interested.
|
|
|
|
|
03-10-2015
|
#10 | |
|
Join Date: Jan 2014
Location: Macomb twp,Michigan
Posts: 108
|
Re: Sw headers
Quote:
|
|
|
|
|
 |
|
|
Hybrid Mode
