Fuel Rail/Fuel Pressure Regulator

[Dynomite]

I am looking for a Fuel Pressure Regulator and I am assuming the whole Fuel Rail with the hard lines/connectors/"O" rings between the Regulator and Rails. Ran into a Fuel Pressure Regulator Failure yesterday with Raw Gas sucked into the Plenum. It is Rare but Happens

I have not figured out how to take a Fuel Pressure Regulator apart but apparently the air controlled valve/bellows totally failed with raw gas being forced out through the vacuum port and sucked into the Plenum from the Fuel Rails.

[A26B]

Ruptured diaphram. The stock regulator is not made to be servicable. There are alternatives besides replacement with a stock style regulator.

All you need is just the regulator. I have the o-rings, PN 14104675-9V and also a stock replacement regulator.

However, YOU would LIKE this! Would be nice n' blingy with braided SS lines & look cool mounted on the RH side of the plenum.

http://www.ebay.com/itm/AEM-Performa...item35dd9b26ae



OR..... in your color

http://www.dezod.com/pd_aeromotive_a...regulator-.cfm



Come to think of it, I may want to do this myself!

[Dynomite]

You know me too well Jerry

Thanks for the information.......I had no clue you sold the Fuel Pressure Regulator separately

[A26B]

Originally Posted by Dynomite

You know me too well Jerry

Thanks for the information.......I had no clue you sold the Fuel Pressure Regulator separately

Yep, under Fuel System Category

Considering you are one of my most prolific customers, and the time span, I've had plenty of opportunity to get to know you..... and glad of it!

[GOLDCYLON]

Originally Posted by A26B

Yep, under Fuel System Category

Considering you are one of my most prolific customers, and the time span, I've had plenty of opportunity to get to know you..... and glad of it!

Just remember your FIRST online customer

BTW Jerry any new hats? I need to order a few things.. My DD hat is taking a beating lol and its been washed twice

[A26B]

Originally Posted by GOLDCYLON

Just remember your FIRST online customer

BTW Jerry any new hats? I need to order a few things

I will never forget that Daryl! Order #0001

I have in stock, but the same original design. Do you have an idea for a new design?

[GOLDCYLON]

Originally Posted by A26B

I will never forget that Daryl! Order #0001

I have in stock, but the same original design. Do you have an idea for a new design?

Maybe the ZR-1 script like our rear end logo, I like the splash logo as well and I can display my my splash pin to it as well like I have on your current hat.

[RussMcB]

Seems like it would be a challenge to use an aftermarket pressure regulator with our hard lines. Where and how would you plumb it?

Just curious.

[A26B]

Originally Posted by RussMcB

Seems like it would be a challenge to use an aftermarket pressure regulator with our hard lines. Where and how would you plumb it?

Just curious.

Braided SS lines

1.Single unregulated supply line to regulator,

2. (a) If regulator equipped for 2 regulated outlet lines, then 1 to each rail.
If not, then (b) single regulated line to Tee fitting + line from each end of Tee run to each rail.

3. Regulator return to return fuel line

Fuel Rails modifications.

1. Weld shut all rail holes for fuel pipe connections between rails

2. Weld AN fittings on firewall end of fuel rails for regulated fuel pressure lines.

3. Mount liquid filled analog gauge direct to regulator

I have a set of modified fuel rails somewhere. Will take photo later if interested.

The benefit is constant fuel pressure at all manifold pressures, from max vacuum to zero or positive pressure if boosted.

[phrogs]

I have a fuel rail that needs rebuilt. Only because it was apart when I got the motor it's from.
Let me dig up a photo for ya