|
![]() |
#1 |
![]() Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,466
|
![]()
This thing screams to have someone go look at it and do a proper assessment!!
http://www.kijiji.ca/v-cars-trucks/c...ationFlag=true Last edited by Paul Workman; 03-03-2015 at 08:58 AM. |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: May 2007
Location: Westminster, Maryland
Posts: 3,684
|
![]()
The link doesn't connect to a ZR-1, and a search does not show a ZR-1. Did they take it away?
Jim |
![]() |
![]() |
![]() |
#3 |
![]() ![]() Join Date: May 2007
Location: Peoria, AZ
Posts: 9,120
|
![]()
i was asking myself the same question. Errr. Paul ?
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director ![]() 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Oct 2004
Posts: 1,884
|
![]()
Paul pasted the link from this CF post that earlier this morning certainly did work:
http://www.corvetteforum.com/forums/...post1589092740 It does still from the CF thread and it worked also from this link: http://www.kijiji.ca/v-cars-trucks/c...ationFlag=true Last edited by WVZR-1; 03-03-2015 at 08:35 AM. |
![]() |
![]() |
![]() |
#5 |
![]() Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,466
|
![]()
Uh! Have to try this again...
http://www.kijiji.ca/v-cars-trucks/c...ationFlag=true Yep. I re-posted it, and now it works again now (verified). Last edited by Paul Workman; 03-03-2015 at 09:00 AM. |
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,453
|
![]()
Wonder what weight oil they have in that motor?....I know it's cold up there but never see an oil pressue gauge pegged like that one is.
Rich
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,786
|
![]()
Probably just doesn't run great- I bet you could probably fix a common secondary not functioning issue and burn rubber out of the used car lot laughing all the way home. It's a long winter up there and nobody wants a vette right now -- somebody with pocket change should go get it.
worst case the ZF is crunchy...but still. |
![]() |
![]() |
![]() |
#8 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,685
|
![]()
Why wouldn't u put pics of the engine bay on the site? Looks decent especially for that price, what could be wrong unless flood car or something.
|
![]() |
![]() |
![]() |
#9 | |
![]() Join Date: Oct 2004
Posts: 1,884
|
![]() Quote:
U or you wouldn't matter if you/u knew what you had it would certainly have been posted. Unusual photos posted, some of the more meaningful ie. SPID, "Certification" and if it's a Canadian build which is likely I believe there would be the "MapleLeaf" on the door or jamb. |
|
![]() |
![]() |
![]() |
#10 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,685
|
![]()
Well the dash is in Metric units. Pretty rare gray color. I still don't get why they didn't build Silver ZRs.
|
![]() |
![]() |
![]() |
|
|