AC Compressor Connector

[LGAFF]

I need to find the two wire connector for the AC Compressor, anyone know where I can get one? this is the one on the actual compressor.

Thanks

[secondchance]

Lee,

I have GM connector catalog in PDF. I look up and identify connector and corresponding GM part number then run search in ebay. Once you have the part number finding one is pretty easy.
Send me your email address and I will email the PDF.

byongyun@gmail.com

Originally Posted by LGAFF

I need to find the two wire connector for the AC Compressor, anyone know where I can get one? this is the one on the actual compressor.

Thanks

[secondchance]

Found the web version where you can look for connectors:

http://www.acdelcotechconnect.com/pa...tails-catalog/

[LGAFF]

Thanks Yun!

[WVZR-1]

The information I had ended up being the harness end of the connector I believe and the compressor side should have "male terminal" and a female shell. There were several number changes and it only had '92 applications originally so I just started over.

It should be this:

http://www.mouser.com/ProductDetail/...BjZOg7MQ%3D%3D

In this pdf search 12162343 and the connector body and the mating connector will be side by side and you can confirm by appearance. This is changed part # information from some older documents but I believe these should be correct.

http://delphi.com/connectors/assets/...ure/met150.pdf


The PT561/12125649 is expensive but I believe likely correct, at NAPA that would be an EC1151 - I believe this connector was used most everywhere on many other vehicles. I seldom use pigtails, I don't buy from Mouser often either but their images and info is easier to come by than the people I buy from. I can't see the end view of the PT561 so it's difficult to confirm.

[LGAFF]

I will take some pics and look for parts #s tomorrow...thanks

[Z51JEFF]

Terminal Supply has most if not all of the OEM connectors.