Help identifying parts - ZR-1 Net Registry Forums

Okiedoke · 08-21-2014

On my last trip to the mechanic, he pointed out a couple of things under the hood that he suggested I follow up on. One was that he noticed I'm missing a cover of sorts. I've circled it in red below. Does anyone know what this is called and where I could get one?

He also had to replace the bolt below with one that's different but had the same thread. Does anyone know where I can get the right bolt?

Thanks.

phrogs · 08-21-2014

You need the two nuts and one screw for the throttle body cover as well, I can't recall the official name but I doubt I have one of these, I might but doubt it. Check jerrysgaskets.com
And ebay as well.

That bolt someone has one . Jerry should

Okiedoke · 08-22-2014

Does one of these look like the correct bolt?

1) Bolt, MAP Sensor to Bracket, NEW 90~95 [6.5B]
2) Bolt, MAP Sensor Brkt to Plenum, NEW,90~95 [6.5A]

Thanks.

Z06scentair · 08-22-2014

Quote:

Originally Posted by Okiedoke

Does one of these look like the correct bolt?

1) Bolt, MAP Sensor to Bracket, NEW 90~95 [6.5B]
2) Bolt, MAP Sensor Brkt to Plenum, NEW,90~95 [6.5A]

Thanks.

Bottom item is what you need.

bracket to plenum bolt.

phrogs · 08-22-2014

Yep the small one is the one you need.

Okiedoke · 08-27-2014

Quote:

Originally Posted by Z06scentair

Bottom item is what you need.

bracket to plenum bolt.

Thanks! It never ceases to surprise me the knowledge on this forum!

Okiedoke · 08-27-2014

Quote:

Originally Posted by phrogs

You need the two nuts and one screw for the throttle body cover as well, I can't recall the official name but I doubt I have one of these, I might but doubt it. Check jerrysgaskets.com
And ebay as well.

Jerry confirmed he didn't carry the cover. I found and ordered a NOS cover at White Racing Products. (Ouch, it's $$$!) They didn't carry the nuts and screw. Jerry's out of town this week. Will check with him to see if he has the nuts and screw next week. In the meantime, if anyone knows the right nuts and screw, would be appreciated.

WVZR-1 · 08-28-2014

Quote:

Originally Posted by Okiedoke

Jerry confirmed he didn't carry the cover. I found and ordered a NOS cover at White Racing Products. (Ouch, it's $$$!) They didn't carry the nuts and screw. Jerry's out of town this week. Will check with him to see if he has the nuts and screw next week. In the meantime, if anyone knows the right nuts and screw, would be appreciated.

Jerry should have nuts (16512106) and the screw (11514501).

The nuts are M4 X 0.7 with a flange, the screw is a self tapping M4.2 X 1.4 x 8 with a torx pan head. I'd think there's no rush so wait for Jerry or just place the order on-line and I believe the store is being "attended to"!

GOLDCYLON · 08-28-2014

Quote:

Originally Posted by phrogs

You need the two nuts and one screw for the throttle body cover as well, I can't recall the official name but I doubt I have one of these, I might but doubt it. Check jerrysgaskets.com
And ebay as well.

That bolt someone has one . Jerry should

I thought it was called the Throttle Shield if memory serves me correctly

WVZR-1 · 08-28-2014

Quote:

Originally Posted by GOLDCYLON

I thought it was called the Throttle Shield if memory serves me correctly

Accelerator cable control shield is GM nomenclature designation.

I likely should have mentioned:

Accelerator cable control splash shield - SPH is the accepted abbreviation for splash so cataloged you would see it as SHIELD, accelerator control cable shield SPH.

08-21-2014	#1
Okiedoke Join Date: Nov 2013 Location: San Jose, CA Posts: 132	Help identifying parts On my last trip to the mechanic, he pointed out a couple of things under the hood that he suggested I follow up on. One was that he noticed I'm missing a cover of sorts. I've circled it in red below. Does anyone know what this is called and where I could get one? He also had to replace the bolt below with one that's different but had the same thread. Does anyone know where I can get the right bolt? Thanks. __________________ 1991 ZR-1 #405 (white/black with blue pin stripes)

08-21-2014	#2
phrogs Join Date: Jul 2004 Location: Kalamazoo MI Posts: 1,760	Re: Help identifying parts You need the two nuts and one screw for the throttle body cover as well, I can't recall the official name but I doubt I have one of these, I might but doubt it. Check jerrysgaskets.com And ebay as well. That bolt someone has one . Jerry should __________________ JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything.

08-22-2014	#3
Okiedoke Join Date: Nov 2013 Location: San Jose, CA Posts: 132	Re: Help identifying parts Does one of these look like the correct bolt? 1) Bolt, MAP Sensor to Bracket, NEW 90~95 [6.5B] 2) Bolt, MAP Sensor Brkt to Plenum, NEW,90~95 [6.5A] Thanks. __________________ 1991 ZR-1 #405 (white/black with blue pin stripes)

08-22-2014	#5
phrogs Join Date: Jul 2004 Location: Kalamazoo MI Posts: 1,760	Re: Help identifying parts Yep the small one is the one you need. __________________ JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything.