ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 05-04-2014   #1
Vetman
 
Vetman's Avatar
 
Join Date: Feb 2013
Location: Yakima Washington
Posts: 401
Talking Exhaust sound

Borla exhaust has been on my z since I have owned it. I love the sound, especially as rpm pass 2000 to 2500 under light acceleration. Anytime a car is along side me drivers usually take notice when I run through that rpm range. My question is does stock exhaust and after market exhaust have the same or similar menacing sound at that rpm range?
__________________
Jim
1990 Z # 2441
1959 c-1 230 HP 4 speed frost blue/silver 3 owner
2011 cts-v 556 HP, manual 6 speed
1955 chev 2dr ht PP 265 3 speed w/OD
Vetman is offline   Reply With Quote
Old 05-04-2014   #2
msorenso
 
msorenso's Avatar
 
Join Date: Apr 2013
Location: South Dakota
Posts: 85
Default Re: Exhaust sound

Just installed a Corsa, no cats, SW headers and it sounds very healthy plus NO DRONE!!!!
msorenso is offline   Reply With Quote
Old 05-05-2014   #3
Fully Vetted
 
Fully Vetted's Avatar
 
Join Date: Sep 2012
Location: Rockwall, Tx
Posts: 1,510
Default Re: Exhaust sound

I have the SW's and no cats. Just need to install my corsa's. What catback are you running?
__________________
_________________

1994 AB/Grey #141

430 RWHP/392 RWTQ

FBI Lyposuction / Secondaries relieved of duty / SW Long Tube Headers / Corsa Exhaust / FIC SS Injectors / MSD Coils / Lightweight Pulleys / Corey tuned
B & M Shifter / Aluminum Flywheel / Samco Hoses / Shelby Series One's / C4 No Flex Frame Stiffener

BBC - Bling By Carter:
Custom ZR-1 Center Caps / Custom Plenum Plate / Air Box Knobs / TB Cover / Oil Filter Cover
Fully Vetted is offline   Reply With Quote
Old 05-05-2014   #4
tf95ZR1
 
tf95ZR1's Avatar
 
Join Date: Aug 2005
Location: Northridge, CA
Posts: 1,457
Default Re: Exhaust sound

I have a Borla exhaust and also love the sound.
The problem is the resonator REALLY robs you
of HP. I replaced the resonator with an X-pipe
(and headers) and WOW! Yep, resonance
around 1800 rpm but for me that's OK.

Last edited by tf95ZR1; 05-05-2014 at 12:55 AM. Reason: Wanted 2
tf95ZR1 is offline   Reply With Quote
Old 05-05-2014   #5
KILLSHOTS
 
Join Date: Feb 2014
Location: AZ
Posts: 860
Default Re: Exhaust sound

Quote:
Originally Posted by Vetman View Post
Borla exhaust has been on my z since I have owned it. I love the sound, especially as rpm pass 2000 to 2500 under light acceleration. Anytime a car is along side me drivers usually take notice when I run through that rpm range. My question is does stock exhaust and after market exhaust have the same or similar menacing sound at that rpm range?
Stock exhaust makes NO noise whatsoever; far too quiet for these cars, in my opinion. Even a stock exhaust with the resonator removed makes virtually no noise. The aftermarket systems all sound different but all add sound over stock.
KILLSHOTS is offline   Reply With Quote
Old 05-05-2014   #6
Jim Nolan
 
Join Date: Jan 2007
Location: Florida
Posts: 241
Smile Re: Exhaust sound

SW's, no cats and Corsa. Sounds good to me.
Jim Nolan is offline   Reply With Quote
Old 05-13-2014   #7
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,072
Default Re: Exhaust sound

Quote:
Originally Posted by KILLSHOTS View Post
Stock exhaust makes NO noise whatsoever; far too quiet for these cars, in my opinion. Even a stock exhaust with the resonator removed makes virtually no noise. The aftermarket systems all sound different but all add sound over stock.
Just add cutouts and you can go from mild to wild sound with the push of a button...Bob
Attached Images
File Type: jpg Cutouts1.JPG (113.0 KB, 23 views)
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
WARP TEN is offline   Reply With Quote
Old 05-13-2014   #8
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,698
Default Re: Exhaust sound

Bob,

Do you still have the stock resonator however?
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is online now   Reply With Quote
Old 05-13-2014   #9
FU
 
FU's Avatar
 
Join Date: Mar 2004
Location: Found Member
Posts: 4,346
Default Re: Exhaust sound

The blue car will have the same setup Bob. Looking forward too that.
The white car had the same setup but with the big flowmaster mufflers , again too noisey. I want quiet , untill the right time. Then let her rip.

I see I'll have to loose the spare........maybe use QTP's oval units.

__________________
Frank Urbo.

NCM Lifetime member # 982
Registry Founding # 237
FU is offline   Reply With Quote
Old 05-13-2014   #10
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,072
Default Re: Exhaust sound

Quote:
Originally Posted by FU View Post
The blue car will have the same setup Bob. Looking forward too that.
The white car had the same setup but with the big flowmaster mufflers , again too noisey. I want quiet , untill the right time. Then let her rip.

I see I'll have to loose the spare........maybe use QTP's oval units.

Hi Frank--I will be working with Marc later this summer on getting the cutouts into the position that Tony D has his manual ones. I would like to remount the spare carrier and I think it can be done, at least based on my preliminary research. If we can get it done I am sure Marc will let his customers know. I looked at the low profile units from QTP for positioning along the pipes just before they bend around the spare but I would rather re use my round ones and put them farther back. We'll see. Also I saw your car at Marc's when we were there--looked good. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
WARP TEN is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:22 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020