WTB - Door Handle - driver's side - ZR-1 Net Registry Forums

QB93Z · 10-06-2013

I need to replace the door unlock switch on the driver's door. I think that I will need to buy a door handle that includes the switch and then cannibilize the switch from it.

Thanks,

Jim

WVZR-1 · 10-07-2013

Which car? The switch is different on a '90 and it's likely only a difference in the electrical connector but if it's for a '91+ car you might want to make sure you source the correct switch. That would allow you to avoid the cut/splice or swapping terminals and the connector. I have no first hand knowledge of the difference.

The switch is '89 and earlier, '90 a single year application and then '91+ by part number.

QB93Z · 10-07-2013

Thanks for the information Dave. I need the switch for the 1994, but I will take anything that will work even if I have to swap connectors.

Jim

Blue Flame Restorations · 10-07-2013

Jim, try Y-ME here on the Registry. He's parted several 91-95's and is in Maryland.

QB93Z · 10-07-2013

Thanks to David J for a good lead to Shawn at CorvetteNutz

(Shawn@corvettenutz.com. 760-845-1308)

I located the part and it is on the way.

Thanks for everyone's help.

Jim

Y-me · 10-16-2013

Quote:

Originally Posted by Blue Flame Restorations

Jim, try Y-ME here on the Registry. He's parted several 91-95's and is in Maryland.

Maryland?

zrwhat · 10-17-2013

Quote:

Originally Posted by Y-me

Maryland?

Well close enough!

DaveK · 10-07-2013

Glad you're not going to have to do a "Dukes of Hazzard" type thing!

Dave

10-06-2013	#1
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,689	WTB - Door Handle - driver's side I need to replace the door unlock switch on the driver's door. I think that I will need to buy a door handle that includes the switch and then cannibilize the switch from it. Thanks, Jim __________________ If it isn't fun, you aren't doing it right! 1990 Black ZR-1 - sold 1993 Quasar Blue ZR-1 1994 Competition Yellow ZR-1 1995 Dark Purple ZR-1 Maryland State Coordinator WAZOO Member

10-07-2013	#2
WVZR-1 Join Date: Oct 2004 Posts: 1,890	Re: WTB - Door Handle - driver's side Which car? The switch is different on a '90 and it's likely only a difference in the electrical connector but if it's for a '91+ car you might want to make sure you source the correct switch. That would allow you to avoid the cut/splice or swapping terminals and the connector. I have no first hand knowledge of the difference. The switch is '89 and earlier, '90 a single year application and then '91+ by part number.

10-07-2013	#3
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,689	Re: WTB - Door Handle - driver's side Thanks for the information Dave. I need the switch for the 1994, but I will take anything that will work even if I have to swap connectors. Jim

10-07-2013	#4
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,904	Re: WTB - Door Handle - driver's side Jim, try Y-ME here on the Registry. He's parted several 91-95's and is in Maryland. __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project Last edited by Blue Flame Restorations; 10-07-2013 at 09:38 AM.

10-07-2013	#5
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,689	Re: WTB - Door Handle - driver's side Thanks to David J for a good lead to Shawn at CorvetteNutz (Shawn@corvettenutz.com. 760-845-1308) I located the part and it is on the way. Thanks for everyone's help. Jim

10-07-2013	#8
DaveK Join Date: Jul 2004 Location: Sudbury, Ontario. Canada Posts: 1,538	Re: WTB - Door Handle - driver's side Glad you're not going to have to do a "Dukes of Hazzard" type thing! Dave __________________ 1991 #1516 Black/Black davidmkelly.com "Speed is often confused with insight." - Johan Cruijff